ActiveXperts Knowledge Base Article 7521060
Most probably, the baud rate causes the problem: COM port and modem are not sending/receiving at the same speed. We strongly recommend to use 9600bps. Two things you need to do:
- Make sure that your COM port is configured to use 9600bps. To do so, open the Windows Device manager and click on COM1-properties. There you can set it to 9600bps.
- Set the modem to 9600bps.
Contact Support
If you cannot find an answer to your question(s) in our Knowledge Base, or if you need additional information or assistance, please contact our Customer Support using the Contact Support form:
Contact Support »