ActiveXperts Knowledge Base Article 6830025
To configure the unit:
- Determine a static IP and net mask that is available on the network;
- Connect the unit to a PC's serial port, using the supplied RS-232 cable;
- Start a terminal emulator program, for instance: HyperTerminal;
- Set the RS-232 port settings to 9600,8,N,1 (no flow control);
- Press Return to reach the main menu;
- From the main menu, you will be able to set the IP address.
Contact Support
If you cannot find an answer to your question(s) in our Knowledge Base, or if you need additional information or assistance, please contact our Customer Support using the Contact Support form:
Contact Support »