ActiveXperts Network Monitor KB - Monitoring Windows / WMI (WinRM)
'Monitoring Windows / WMI (WinRM)' Knowledge Base Articles
| Q7260015 | How to verify WMI access through WinRM? |
| Verify that WinRM is enabled To confirm that WinRM is enabled, type the followng command: winrm e winrm/config/listener You should see output that shows that the listener is running and that the firewall is not blocking the connection. Additionaly, you can check the port using the 'nets ... | |
| Q7260022 | Verify WMI over WinRM on a (remote) Windows machine I want to monitor? |
| You can easily check if WMI/WinRM is enabled or disabled by using the following Powershell command on the Windows machine you want to monitor: Get-WSManInstance -ComputerName MYSERVER01 -Enumerate -ResourceURI wmicimv2/* -Filter "SELECT * FROM Win32_ComputerSystem" OR, if you want to use ... | |
| Q7260024 | I am troubleshooting WinRM. It looks like WinRM is not working at all. How can I check if it listens to port 5985? |
| Open a new command prompt and type the following command: netstat -ano | findstr 5985 ... | |
| Q7260040 | How do I enable WinRM on a standalone server? |
| There are two ways to enable WinRM on a standalone server: Using the WinRM quick configuration tool Using the Local Group Policy Editor (GPEDIT.MSC) Enable WinRM using the WinRM quick configuration tool To enable WinRM on a standalone Windows Server: Open an elevated Command Pr ... | |
| Q7260100 | How do I verify WinRM only (without WMI) on a (remote) Windows machine? |
| If you just want to check if WinRM is enabled or disabled without checking WMI, use the following Powershell command: Test-WSMan -ComputerName MYSERVER01 -Authentication default OR, if you want to use credentials other than the one you logged in with: Test-WSMan -ComputerName MYSERVER ... | |
| Q7260110 | How to enable WinRM on Windows domain member servers in a Windows Active Directory Domain? |
| To enable WinRM on Windows member servers in a Windows Active Directory Domain, you can use a Group Policy Object (GPO): Create a new GPO: Open the Group Policy Management Console and create a new GPO linked to the domain or an appropriate Organizational Unit (OU) that contains your domain ... | |
| Q7260120 | We are using WMI over WinRM and getting error 0x803380E4 when monitoring a particular Windows server. What could be the reason? |
| Error code 0x803380E4 in the context of using WMI (Windows Management Instrumentation) over WinRM (Windows Remote Management) typically indicates a permissions or authentication issue. This error code can be somewhat cryptic, but it often points to a specific problem with the configuration or acce ... |
Contact Support
If you cannot find an answer to your question(s) in our Knowledge Base, or if you need additional information or assistance, please contact our Customer Support using the Contact Support form:
Contact Support »