Knowledge Base FAQ Items
Browse "Monitoring Temperature, Humidity and Wetness" Questions: |
---|
Q7100025: We purchased the ActiveXperts/Sensatronics bundle, and just received the EM1 device. However, we do know the default IP address of this device. How can we set it? To configure the unit: Determine a static IP and net mask that is available on the network; Connect the unit to a PC's serial port, using the supplied RS-232 cable; Start a terminal emulator program, for instance: HyperTerminal; Set the RS-232 port settings to 9600,8,N,1 (no flow control); Press Return to reach the main menu; From the main menu, you will be able to set the IP address. Network Monitor > Monitoring Temperature, Humidity and Wetness Q7100015: We purchased a Sensatronics EM1 device. Our network policy requires to use SNMP. You built-in temperature seems to be based on Sensatronics' web interface. How can I use SNMP to monitor temperature? Q7100027: Do you have a list of Sensatronics OID's that can be monitored by Network Monitor? We use the EM1 model. Q7100020: Can you provide me with a list of all AVTech devices supported by your software? Q7100040: After the upgrade to the latest version, all Sensatronics checks fail. Q7100010: Your web site says that a Sensatronics device is recommended. I already have a device from NTI (Network Technologies) that does exactly the same. Can I use it?
|