Win32_PerfRawData_Tcpip_UDP - WMI sample in VBScript

The foundations for Manageability in Windows 7/2008/Vista/XP/2000 and Millennium Edition/'98 are Windows Management Instrumentation (WMI; formerly WBEM) and WMI extensions for Windows Driver Model (WDM).

ActiveXperts Network Monitor provides the ability to build monitor check routines based on WMI. ActiveXperts has collected more than a hundred WMI samples. You can use these samples as a base for new check routines you can write yourself.

On this site, you can find many WMI samples.

The Win32_PerfRawData_Tcpip_UDP WMI class can be used in ActiveXperts Network Monitor to monitor your servers.


Win32_PerfRawData_Tcpip_UDP

Description

The Win32_PerfRawData_Tcpip_UDT raw data performance counter class represents raw data counters that measure the rates at which UDP datagrams are sent and received by using the UDP protocol. It includes counters that monitor UDP protocol errors. This class is shown as the UDP object in System Monitor. The WMI source of its data is the high-performance Performance Counter Provider. The original data source is the Tcpip performance library. The corresponding formatted data class is Win32_PerfFormattedData_Tcpip_UDP. This class was added for Windows 2000.

Example(s)

On Error Resume Next
strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_PerfRawData_Tcpip_UDP",,48)
For Each objItem in colItems
    Wscript.Echo "Caption: " & objItem.Caption
    Wscript.Echo "DatagramsNoPortPersec: " & objItem.DatagramsNoPortPersec
    Wscript.Echo "DatagramsPersec: " & objItem.DatagramsPersec
    Wscript.Echo "DatagramsReceivedErrors: " & objItem.DatagramsReceivedErrors
    Wscript.Echo "DatagramsReceivedPersec: " & objItem.DatagramsReceivedPersec
    Wscript.Echo "DatagramsSentPersec: " & objItem.DatagramsSentPersec
    Wscript.Echo "Description: " & objItem.Description
    Wscript.Echo "Frequency_Object: " & objItem.Frequency_Object
    Wscript.Echo "Frequency_PerfTime: " & objItem.Frequency_PerfTime
    Wscript.Echo "Frequency_Sys100NS: " & objItem.Frequency_Sys100NS
    Wscript.Echo "Name: " & objItem.Name
    Wscript.Echo "Timestamp_Object: " & objItem.Timestamp_Object
    Wscript.Echo "Timestamp_PerfTime: " & objItem.Timestamp_PerfTime
    Wscript.Echo "Timestamp_Sys100NS: " & objItem.Timestamp_Sys100NS
Next