CISCO-LAG-MIB.mib object view, vendor Cisco

CISCO-LAG-MIB file content

Object view of CISCO-LAG-MIB:

Scalar Object
clagAggDistributionProtocol	.1.3.6.1.4.1.9.9.225.1.1.1
This object controls the load balancing algorithms used on this LACP interface to distribute outgoing data frames among its component interfaces.
clagAggDistributionAddressMode	.1.3.6.1.4.1.9.9.225.1.1.2
The load balancing address mode for the device.
clagAggDistributionMplsProtocol	.1.3.6.1.4.1.9.9.225.1.1.3
This object controls the load balancing algorithms used on this LACP interface to distribute outgoing MPLS data frames among its component interfaces. This object is only instantiated on platforms which support aggregation load balancing for MPLS packets.
clagAggProtocolEntry	.1.3.6.1.4.1.9.9.225.1.2.1.1
Entry containing aggregation protocol type for a particular interface. An entry is created in this table when its associated ifEntry is created and that interface supports link aggregation. The entry of this table is deleted when the associated ifEntry is removed.
clagAggPortEntry	.1.3.6.1.4.1.9.9.225.1.3.1.1
An entry containing additional management information applicable to a particular aggregation port.
Tabular Object
clagAggProtocolType	.1.3.6.1.4.1.9.9.225.1.2.1.1.1
The aggregation protocol type for the interface. On some platforms, aggregation protocol may be assigned per group. The group can be a collection of the ports which belong to a module or system. If the aggregation protocol is assigned to any of the ports in such group then the aggregation protocol will apply to all ports in the same group. On some platforms, aggregation protocol type can be assigned per aggregator. If multiple ports belong to a aggregator, the aggregation protocol assigned to any of the ports in such aggregator will apply to all ports in the same.
clagAggPortAdminStatus	.1.3.6.1.4.1.9.9.225.1.3.1.1.1
The administrative status of the LACP protocol on this aggregation port.
Table
clagAggProtocolTable	.1.3.6.1.4.1.9.9.225.1.2.1
A table that contains protocol information about every interface which supports link aggregation.
clagAggPortTable	.1.3.6.1.4.1.9.9.225.1.3.1
A table that contains information about every aggregation port that is associated with this system. This table contains additional objects for the dot3adAggPortTable.
Object Identifier
ciscoLagMIB	.1.3.6.1.4.1.9.9.225
Cisco Link Aggregation module for managing IEEE Std 802.3ad. This MIB provides Link Aggregation information that are either excluded by IEEE Std 802.3ad (IEEE8023-LAG-MIB) or specific to Cisco products.
clagMIBObjects	.1.3.6.1.4.1.9.9.225.1
clagGlobalConfigObjects	.1.3.6.1.4.1.9.9.225.1.1
clagAgg	.1.3.6.1.4.1.9.9.225.1.2
clagAggPort	.1.3.6.1.4.1.9.9.225.1.3
clagMIBNotifications	.1.3.6.1.4.1.9.9.225.2
clagMIBConformance	.1.3.6.1.4.1.9.9.225.3
clagMIBCompliances	.1.3.6.1.4.1.9.9.225.3.1
clagMIBGroups	.1.3.6.1.4.1.9.9.225.3.2
Group
clagAggProtocolGroup	.1.3.6.1.4.1.9.9.225.3.2.1
The object that provide aggregation protocol type of an interface. These are additional to the IEEE Std 802.3ad MIB.
clagAggPortGroup	.1.3.6.1.4.1.9.9.225.3.2.2
A collection of objects that provide admin status about an aggregation port. These are additional to the IEEE Std 802.3ad MIB.
clagAggDistributionGroup	.1.3.6.1.4.1.9.9.225.3.2.3
A collection of objects that provide the load balancing information for an aggregator. These are additional to the IEEE Std 802.3ad MIB.
clagAggDistributionMplsGroup	.1.3.6.1.4.1.9.9.225.3.2.4
A collection of objects that provide the load balancing information for an aggregator for MPLS packets. These are additional to the IEEE Std 802.3ad MIB.