-- *****************************************************************
-- ciscoEntityCapabilities MIB
--
-- AGENT-CAPABILITIES mib for ENTITY-MIB 
--
-- June 2002, Subra Hegde
-- August 2003, Seth Wang
--
-- Copyright(c) 2002-2003 by Cisco Systems,Inc.
--
-- *****************************************************************

CISCO-ENTITY-CAPABILITY DEFINITIONS ::= BEGIN
IMPORTS
        MODULE-IDENTITY
                FROM SNMPv2-SMI
        AGENT-CAPABILITIES
                FROM SNMPv2-CONF
        ciscoAgentCapability
                FROM CISCO-SMI;   

ciscoEntityCapability MODULE-IDENTITY
        LAST-UPDATED    "200308120000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 W Tasman Drive
                        San Jose, CA  95134
                        USA

                        Tel: +1 800 553-NETS

                E-mail: cs-snmp@cisco.com
                        cs-lan-switch-snmp@cisco.com"
        DESCRIPTION
                "The Agent Capabilities for ENTITY-MIB."

        REVISION "200308120000Z"
        DESCRIPTION
            "Updated the ciscoEntityCapability OID with the one
             assigned by CANA."
        REVISION "200308080000Z"
        DESCRIPTION
            "Added ciscoEntityCapV12R0111bEXCat6K
             ciscoEntityCapV12R0214SXCat6K and
             ciscoEntityCapCatOSV08R0101."
        REVISION "200206120000Z"
        DESCRIPTION
            "Initial version of this MIB module."
        ::= { ciscoAgentCapability 277 }

ciscoEntityCapabilityV2R00 AGENT-CAPABILITIES

PRODUCT-RELEASE "MGX8850 Release 2.00,
                BPX SES Release 1.00"
STATUS          current
DESCRIPTION     "Agent capabilities for ENTITY-MIB."

SUPPORTS ENTITY-MIB
INCLUDES { entityPhysicalGroup,entityPhysical2Group  }

VARIATION    entPhysicalName
DESCRIPTION  "This Object is set to one of the following 
             for entPhysicalClass = module(9)
                 * Slot Number for the Module
                 * Slot Number as seen in rear view of the
                   chassis for the line module(Back cards).
             for entPhysicalClass = chassis(1)
                 * Chassis number(Shelf number)"

VARIATION    entPhysicalMfgName
DESCRIPTION  "This Object is set to PCB Part Number
             800 Level if applicable. It contains
             a zero-length string if 800 level
             is not applicable."

VARIATION    entPhysicalModelName
DESCRIPTION  "This Object is set to PCB Part Number 
             73 Level if applicable. It contains
             a zero-length string if 73 Level is not 
             applicable."

VARIATION    entPhysicalAssetID
ACCESS       not-implemented
DESCRIPTION  "Not supported."

    ::= { ciscoEntityCapability 1 }

ciscoEntityCapV12R0111bEXCat6K AGENT-CAPABILITIES
    PRODUCT-RELEASE     "Cisco IOS 12.1(11b)EX on Catalyst 6000/6500
                         and Cisco 7600 series devices."
    STATUS              current
    DESCRIPTION         "ENTITY-MIB capabilities."

    SUPPORTS            ENTITY-MIB
        INCLUDES        { entityPhysicalGroup, entityLogicalGroup,
                          entityMappingGroup, entityGeneralGroup,
                          entityNotificationsGroup }

        VARIATION       entLPPhysicalIndex
            ACCESS      not-implemented
            DESCRIPTION "Not supported."

        VARIATION       entAliasMappingIdentifier
            ACCESS      not-implemented
            DESCRIPTION "Not supported."

    ::= { ciscoEntityCapability 2 }

ciscoEntityCapV12R0214SXCat6K AGENT-CAPABILITIES
    PRODUCT-RELEASE     "Cisco IOS 12.2(14)SX on Catalyst 6000/6500
                         and Cisco 7600 series devices."
    STATUS              current
    DESCRIPTION         "ENTITY-MIB capabilities."

    SUPPORTS            ENTITY-MIB
        INCLUDES        { entityPhysicalGroup, entityLogicalGroup,
                          entityMappingGroup, entityGeneralGroup,
                          entityNotificationsGroup,
                          entityPhysical2Group, entityLogical2Group }

        VARIATION       entPhysicalSerialNum
            ACCESS      read-only
            DESCRIPTION "Only support read-only access."

        VARIATION       entLPPhysicalIndex
            ACCESS      not-implemented
            DESCRIPTION "Not supported."

    ::= { ciscoEntityCapability 3 }

ciscoEntityCapCatOSV08R0101 AGENT-CAPABILITIES
    PRODUCT-RELEASE     "Cisco CatOS 8.1(1)."
    STATUS              current
    DESCRIPTION         "ENTITY-MIB capabilities."

    SUPPORTS            ENTITY-MIB
        INCLUDES        { entityPhysicalGroup, entityMappingGroup,
                          entityGeneralGroup, entityNotificationsGroup,
                          entityPhysical2Group }

        VARIATION       entPhysicalSerialNum
            ACCESS      read-only
            DESCRIPTION "Only support read-only access."

        VARIATION       entPhysicalAssetID
            ACCESS      not-implemented
            DESCRIPTION "Not supported."

        VARIATION       entLPPhysicalIndex
            ACCESS      not-implemented
            DESCRIPTION "Not supported."

    ::= { ciscoEntityCapability 4 }

END