Shortcut Menu

Skip

Main Navigation

Choose your language

You are here:

ActiveXperts.com > Administration > MIB > Stratacom > CISCO-WAN-SRCP-MIB

ActiveXperts Network Monitor supports SNMP based checks.It ships with free SNMP GET and SNMP TRAP utilities. It also offers many SNMP scripts (PowerShell and VBScript).

Use ActiveXperts Netork Monitor to monitor your virtualization servers, domains, computers and devices. It runs on a single Windows server, without agents required on the monitored systems. It has many built-in checks and also allows administrators to create custom checks using PowerShell, VBScript and SSH.


CISCO-WAN-SRCP-MIB by vendor Stratacom

CISCO-WAN-SRCP-MIB file content

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.


Vendor: Stratacom
Mib: CISCO-WAN-SRCP-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor [download]    (ships with advanced SNMP/MIB tools)
-- *****************************************************************
-- CISCO-WAN-SRCP-MIB.my  
--
-- January 2004, George Ogagan 
--
-- Copyright (c) 1999, 2000, 2001, 2002, 2003, 2004 by
-- Cisco Systems, Inc.
-- All rights reserved.
-- 
-- *****************************************************************

CISCO-WAN-SRCP-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, 
    OBJECT-TYPE, 
    Integer32, 
    Counter32, 
    IpAddress 
		FROM SNMPv2-SMI
    DisplayString
                FROM SNMPv2-TC
    MODULE-COMPLIANCE, 
    OBJECT-GROUP    
 		FROM SNMPv2-CONF
    ciscoWan    FROM CISCOWAN-SMI
    mgcRedundancyGrpNum FROM CISCO-WAN-MGC-REDUN-MIB;

ciscoWanSrcpMIB MODULE-IDENTITY
    LAST-UPDATED "200401300000Z"
    ORGANIZATION "Cisco Systems, Inc."
    CONTACT-INFO
            "       Cisco Systems
                    Customer Service
 
                Postal: 170 W Tasman Drive
                        San Jose, CA 95134
                        USA
 
                        Tel: +1 800 553-NETS
 
                E-mail: cs-wanatm@cisco.com"

    DESCRIPTION
            "The MIB module for managing SRCP(Simple Resource
             Coordination Protocol) implementations. SRCP
             is a resource coordination protocol used
             between a MGC(Media Gateway Controller) and
             a MG(Media Gateway). SRCP MIB is applicable
             to both controllers (SRCP clients) and gateways
             (SRCP servers).
             
             MGMIB: This is the short name used for 
                    CISCO-WAN-MG-MIB in this MIB."

    REVISION  "200401300000Z"
    DESCRIPTION
        "Update descriptions in the MIB.
        "

    REVISION  "200012260000Z"
    DESCRIPTION 
        "Changed description of srcpRequestMaxTimeout which
         had a reference to an object srcpRequestMinTimeout
         which should actually be srcpRequestTimeout.
        "

    REVISION  "200008310000Z"
    DESCRIPTION 
        "moved srcpRequestMinTimeout, srcpRequestRetries
         and srcpRequestMaxTimeout objects to new subgroup
         srcpAdminRetyObject        
        "

    REVISION "200007210000Z"
    DESCRIPTION 
        "Added following new objects for exponential retry
         srcpRequestTimeOut , srcpRequestRetries, 
         srcpRequestMaxTimeout
        "
    REVISION  "200005280000Z"
    DESCRIPTION
        "Moved some objects from the srcpPeerTable to the 
         srcpPeerGrpTable for the implementation of the 
         MGC Redundancy Feature.
        "

    REVISION  "200005240000Z"
    DESCRIPTION
        "added srcpRequestMinTimeout, srcpRequestRetries and 
         srcpRequestMaxTimeout objects
        "

    REVISION  "199911230000Z"
    DESCRIPTION 
        "Added DEFVAL clause for srcpPeerHeartbeatInterval, 
         srcpPeerMaxPduSize.
        "

    REVISION  "199911010000Z"
    DESCRIPTION
        "Changed the description of srcpPeerHeartbeatInterval
         to say that value less than 100 (except 0) is not
         allowed.
        "

    REVISION  "199910210000Z"
    DESCRIPTION 
        "Changed the description of TimeSinceHeartbeat as it 
         was saying return -1 if in locked state or unassociated 
         state. But -1 is not a valid value as per the specified 
         range. Changed it to return 0.
        "

    REVISION  "199906230000Z"
    DESCRIPTION 
        "Added definition for srcpStatsPeerName & changed 
         srcpPeerName to read-only.
        "

    REVISION  "199906070000Z"
    DESCRIPTION 
        "Added DEFVAL clause for srcpPortNumber and 
         srcpPeerPortNumber
        "

    REVISION  "199904290000Z"
    DESCRIPTION 
        "Initial version of the MIB.
        "
    ::= { ciscoWan 11 }

srcpObjects                OBJECT IDENTIFIER ::= { ciscoWanSrcpMIB 1 }
srcpAdminObjects           OBJECT IDENTIFIER ::= { srcpObjects 1 }
srcpStatsObjects           OBJECT IDENTIFIER ::= { srcpObjects 2 }
srcpAdminRetyObjects       OBJECT IDENTIFIER ::= { srcpObjects 3 }

-- *********************************************************************
-- The SRCP administration Group 
-- *********************************************************************

srcpVersion OBJECT-TYPE
    SYNTAX     DisplayString (SIZE (1..64)) 
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The name of the SRCP protocol version for
         exmaple SRCP 1.0.2.  If MGMIB is supported,
         this name corresponds to mgProtocolName
         (defined in CISCO-WAN-MG-MIB MIB) in an
         entry to mgSupportedProtocolTable.
        "
    ::= { srcpAdminObjects 1 }

srcpPortNumber OBJECT-TYPE
    SYNTAX      Integer32 (1025..65535)  
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    	"This object is used to configure the UDP port used 
         for SRCP on the system (local UDP port). It is
         configurable only if the system is in a locked or
         disabled state (i.e If MGMIB Is supported,
         mgAdministrativeState(defined in CISCO-WAN-MG-MIB MIB)
         should be 'locked' before the UDP port can be configured).
        "
    DEFVAL { 2428 }
    ::= { srcpAdminObjects 2 }

-- **************************************************************************
--  SRCP Peer Table
-- **************************************************************************

srcpPeerTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF SrcpPeerEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "This is a table which is used to provision peer-specific
         SRCP configuration and administration information. 
         Each table entry corresponds to an SRCP peer as 
         identified by its domain name(srcpPeerName).
        "
    ::= { srcpAdminObjects 3 }

srcpPeerEntry OBJECT-TYPE
    SYNTAX     SrcpPeerEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "Represents an individual table entry in srcpPeerTable.
        Each row corresponds to an SRCP peer and is identified
        by its domain name (srcpPeerName). 

        Entries in this table are implicitly created by the agent. 

        If the agent supports MGMIB, this occurs as follows:
        An entry shall be created when an entry is created in the 
        mgcRedundancyGrpProtocolTable(defined in
        CISCO-WAN-MGC-REDUN-MIB MIB) and when
        mgProtocolNumber (defined in CISCO-WAN-MG-MIB MIB)
        refers to SRCP as supported protocol. An entry will
        be made for all MGC(Media Gateway Controller) in
        that MGC Redundancy Group. Accordingly, an entry
        shall be deleted if the corresponding entry in
        the mgcRedundancyGrpProtocolTable is deleted.

        If the agent does not support MGMIB, entry creation
        might occur when the first SRCP communication with
        an IP address/domain  name occurs.

        if MGC Redundacy feature is supported the following objects:
        srcpPeerHeartbeatInterval, srcpPeerTimeSinceHeartbeat
        rcpPeerMaxPduSize are not meaningful here. These objects
        are defined per MGC Redundancy Group rather than per MGC.
        "
        INDEX   { srcpPeerId }
    ::= { srcpPeerTable 1 }

SrcpPeerEntry ::= SEQUENCE {
                srcpPeerId                   Integer32, 
                srcpPeerName                 DisplayString,
                srcpPeerPortNumber           Integer32, 
                srcpPeerHeartbeatInterval    Integer32, 
                srcpPeerTimeSinceHeartbeat   Integer32, 
                srcpPeerMaxPduSize           Integer32
        }


srcpPeerId OBJECT-TYPE
    SYNTAX      Integer32(1..65535) 
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object identifies the SRCP peer and serves
         as index to this table. If MGMIB is supported, 
         this is the same as the mgcNumber(defined
         in CISCO-WAN-MG-MIB MIB) from the mgcTable.
        "
    ::= { srcpPeerEntry 1 }

srcpPeerName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..64)) 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object identifies the name of the SRCP peer. 
         If MGMIB is supported, this is the same as the 
         mgcName from the mgcTable. 
        "
    ::= { srcpPeerEntry 2 }

srcpPeerPortNumber  OBJECT-TYPE
    SYNTAX      Integer32 (1025..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object is used to configure the UDP port of 
        the SRCP peer.
        "
    DEFVAL { 2428 }
    ::= { srcpPeerEntry 3 }

srcpPeerHeartbeatInterval  OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    UNITS       "milliseconds"
    MAX-ACCESS  read-write
    STATUS      deprecated
    DESCRIPTION
        "This object is used to configure the length of the 
         heartbeat interval, in milliseconds. The heartbeat
         interval indicate when the GW(Gateway) is expected to
         receive a heartbeat from a specific peer or MGC group.
         If value is 0, heartbeat for this peer is not
         monitored.  The heartbeat interval less than 100 is
         not allowed (except 0).

         If MGC Redundancy is supported, this object is not 
         effective. Instead, the user should use
         srcpPeerGrpHeartbeatInterval. 
        "
    DEFVAL { 0 }
    ::= { srcpPeerEntry 4 }

srcpPeerTimeSinceHeartbeat  OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    UNITS       "milliseconds"
    MAX-ACCESS  read-only
    STATUS      deprecated
    DESCRIPTION
        "The time since the last heartbeat was received, in
         milliseconds.  This represents the difference between
         the current time and the last time an SRCP command was
         received. 

         A value of 0 shall be returned if the heartbeat is not
         monitored.  Even if the heartbeat is monitored, a value
         of 0 shall be returned if any of the following is true:

         i)  The system is locked or disabled (as indicated by 
             mgAdministrativeState). 
         ii) The srcpPeer is unassociated as indicated by
             mgcAssociationState(defined in CISCO-WAN-MG-MIB MIB).

         If MGC Redundancy is supported, this object is not
         effective. Instead, the user should use
         srcpPeerGrpTimeSinceHeartbeat.
        "
    ::= { srcpPeerEntry 5 }

srcpPeerMaxPduSize  OBJECT-TYPE
    SYNTAX      Integer32 (4095..65535)
    UNITS       "octets"
    MAX-ACCESS  read-write
    STATUS      deprecated
    DESCRIPTION
        "This object is used to configure the maximum UDP
         PDU(Protocol Data Unit) size, in octets, that may
         be used for SRCP communications with the peer. 

         This value may not be configurable for all agents.

         If MGC Redundancy is supported, this object is not
         effective. Instead, the user should use
         srcpPeerGrpMaxPduSize.
        " 
    DEFVAL { 16384 }
    ::= { srcpPeerEntry 6 }


-- **************************************************************************
--  SRCP Peer Group Table
-- **************************************************************************

srcpPeerGrpParamTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SrcpPeerGrpParamEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table is used to provision SRCP parameters for
         an MGC Redundancy group. MGCs can be configured as part
         of MGC Redundancy groups. This feature allows for
         redundant call agents.

         Each table entry corresponds to an SRCP peer entry that is
         identified by the MGC Redundancy group number.
        "
    ::= { srcpAdminObjects 4 }

srcpPeerGrpParamEntry OBJECT-TYPE
    SYNTAX      SrcpPeerGrpParamEntry 
    MAX-ACCESS  not-accessible 
    STATUS      current
    DESCRIPTION
        "Represents an individual table entry in the
         srcpPeerGrpParamTable. Each row corresponds to 
         an MGC Redundancy Group and is identified by the
         MGC Redundancy Group Number.
             
         Entries are implicitly created when the SRCP protocol 
         is added for an MGC Redundancy Group. The entry will
         be removed if the SRCP protocol is removed for an MGC 
         Redundancy Group.
        "
    INDEX { mgcRedundancyGrpNum }
    ::= {srcpPeerGrpParamTable 1 }

SrcpPeerGrpParamEntry ::= SEQUENCE {
                        srcpPeerGrpHeartbeatInterval   Integer32,
                        srcpPeerGrpTimeSinceHeartbeat  Integer32,
                        srcpPeerGrpMaxPduSize          Integer32
                    }

srcpPeerGrpHeartbeatInterval  OBJECT-TYPE 
    SYNTAX      Integer32 (0..65535)      
    UNITS       "milliseconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION 
        "This object is used to configure the length of the
         heartbeat interval, in milliseconds. If 0, heartbeat 
         for this peer Group is not monitored. The heartbeat
         interval less than 100 is not allowed (except 0).
        "
    DEFVAL { 0 }
    ::= { srcpPeerGrpParamEntry 1 }

srcpPeerGrpTimeSinceHeartbeat  OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    UNITS       "milliseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The time since the last heartbeat was received,
        in milliseconds. This represents the difference
        between the current time and the last time an SRCP 
        command was received.

        A value of 0 shall be returned if the heartbeat is not
        monitored.  Even if the heartbeat is monitored, a value 
        of 0 shall be returned if any of the following is true:

        i)  The system is locked or disabled (as indicated by
            mgAdministrativeState).
        ii) The stateChangeNtfy flag is disabled for the srcpPeer
            Group (as indicated by mgcRedundancyGrpStateChangeNtfy
            of CISCO-WAN-MGC-REDUN-MIB).
        "
    DEFVAL { 0 }
    ::= { srcpPeerGrpParamEntry 2 }

srcpPeerGrpMaxPduSize  OBJECT-TYPE
    SYNTAX      Integer32 (4095..65535)
    UNITS       "octets"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object is used to configure the maximum UDP PDU size,
         in octets, that may be used for SRCP communications with 
         the peer. This value may not be configurable for all agents.
        "
    DEFVAL { 16384 }
    ::= { srcpPeerGrpParamEntry 3 }


-- *********************************************************************
-- The SRCP administration Retry Group 
-- *********************************************************************

srcpRequestTimeOut OBJECT-TYPE
    SYNTAX      Integer32 (1..10000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the minimum timeout value.

         This value along with srcpRequestMaxTimeout and
         srcpRequestRetries is used to determine the exponential
         retry interval for retransmitting unacknowledged SRCP
         messages.

         It is the responsibility of the requesting entity to
         provide suitable timeouts for all outstanding commands,
         and to retry commands when timeouts exceeded.

         The default value of this object is 500 milliseconds.

         When the value of this object changes srcpAdminObjects
         group changed trap will be sent as specify by
         vismConfigChangeTypeBitMap in CISCO-VISM-MODULE-MIB.
        "
    ::= { srcpAdminRetyObjects 1 }

srcpRequestRetries  OBJECT-TYPE
    SYNTAX      Integer32 (0..10)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the number of retries for a SRCP 
         request that exceeds timeout. It is the responsibility 
         of the requesting entity to provide suitable timeouts for 
         all outstanding commands, and to retry when times out.

         The default value of this object is 3.

         When the value of this object changes srcpAdminObjects
         group changed trap will be sent as specify by
         vismConfigChangeTypeBitMap in CISCO-VISM-MODULE-MIB.
        "
    ::= { srcpAdminRetyObjects 2 }

srcpRequestMaxTimeout  OBJECT-TYPE
    SYNTAX      Integer32 (1..10000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the maximum timeout value.

         This timer value is used along with srcpRequestTimeOut and
         srcpRequestRetries to determine the exponential retry
         interval for retransmitting unacknowledged SRCP messages.

         The value of this timer has to be greater than or equal to
         srcpRequestTimeOut.

         The default value of this object is 500 milliseconds.

         When the value of this object changes srcpAdminObjects
         group changed trap will be sent as specify by
         vismConfigChangeTypeBitMap in CISCO-VISM-MODULE-MIB.
        "
      ::= { srcpAdminRetyObjects 3 }


-- *****************************************************************
-- The SRCP Statistics table
-- *****************************************************************
srcpPeerStatsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SrcpPeerStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains SRCP statistics information since
         reset. SRCP statistics are kept in this table, with
         each table entry containing the statistics of SRCP
         messages that communicated with a peer at a specific
         IP address of the peer.

         It differs from the SRCP peer table which maintains
         information on a per call agent basis as identified
         by their domain names.
	"
    ::= { srcpStatsObjects 1 }

srcpPeerStatsEntry OBJECT-TYPE
    SYNTAX      SrcpPeerStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The row of the srcpPeerStatsTable contains information about 
         SRCP message statistics per IP address of the MGC.

         An entry is implicitly created and deleted by the agent. 

         There can be two cases:

         1. Case of Internal address resolution : In this case IP
            addresses of all SRCP peers are resolved internally.
            If the agent supports the MGMIB, the following
            referential integrity rules apply:

         When an entry is added to mgcResolutionTable defined in
         CISCO-WAN-MG-MIB with a specific IP address, an entry 
         is created in this srcpPeerStatsTable for that IP address. 
         When an entry is deleted from mgcResolutionTable,
         the row with the corresponding IP address in this table
         will be deleted.
            
         2. Case of External address resolution : If there is at
            least one Call agent whose IP address is resolved
            externally, an entry is created whenever SRCP
            communication occurs with a new IP address. Table
            entries are never deleted, but must be 
            nonpersistent in agent implementations, i.e. must be
            purged in case of a system shutdown/restart.
	"
    INDEX   { srcpStatsPeerIpAddress }
    ::= { srcpPeerStatsTable 1 }


SrcpPeerStatsEntry ::= SEQUENCE {
        srcpStatsPeerIpAddress       IpAddress,
        srcpStatsPeerName            DisplayString,
        packetsDiscardedCnts         Counter32,
        augwCnts                     Counter32,
        augwFailCnts                 Counter32,
        aulnCnts                     Counter32,
        aulnFailCnts                 Counter32,
        ntfyCnts                     Counter32,
        ntfyFailCnts                 Counter32,
        rqntCnts                     Counter32,
        rqntFailCnts                 Counter32
    }


srcpStatsPeerIpAddress  OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object specifies the IP address of the  
         SRCP peer and serves as index to the table.
        "
    ::= { srcpPeerStatsEntry 1 }

srcpStatsPeerName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..64)) 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Denotes the name of the SRCP peer. This is the
         same as the mgcName from the mgcTable. It is provided
         here as a read-only parameter as a convinience feature.
        "
    ::= { srcpPeerStatsEntry 2 }


packetsDiscardedCnts  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of packets that were received and discarded. 
         The packets may get discarded because of indecipherable 
         PDUs like bad protocol version, bad command verb etc, or 
         because of unknown transaction IDs (in case of SRCP clients).
        "
    ::= { srcpPeerStatsEntry 3 }
 
augwCnts  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of AUGW(Audit Gateway) commands received
         from the peer on this IP address."
    ::= { srcpPeerStatsEntry 4 }

aulnCnts  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of AULN(Audit Line) commands received from 
         or sent to the peer on this IP address.
        "
    ::= { srcpPeerStatsEntry 5 }

rqntCnts  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of RQNT(Notification Request) commands
         received from or sent to the peer on this IP address.
        "
    ::= { srcpPeerStatsEntry 6 }

ntfyCnts  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of NTFY(Notify) commands received from 
         or sent to the peer on this IP address.
        "
    ::= { srcpPeerStatsEntry 7 }

augwFailCnts  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "For MG : The total number of AUGW commands 
         received that were responded to with a failure 
         return code.

         For MGC : The total number of AUGW commands sent which
         were timed out without a response or for which a response
         with failure return code was received.
        "
    ::= { srcpPeerStatsEntry 8 }

aulnFailCnts  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Media gateway : The total number of AULN commands 
         received that were responded to with a failure 
         return code.

         Media gateway controller : The total number of AULN
         commands sent which were timed out without a response or 
         For which a response with failure return code
         was received.
        "
    ::= { srcpPeerStatsEntry 9 }

rqntFailCnts  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Media gateway : The total number of RQNT commands 
         received that were responded to with a failure return 
         code.

         Media gateway controller : The total number of RQNT 
         commands sent which were timed out without a response 
         or for which a response with failure return code was 
         received.
        "
    ::= { srcpPeerStatsEntry 10 }

ntfyFailCnts  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Media gateway : The total number of NTFY commands sent 
         which were timed out without a response or for which a
         response with failure return code was received.

         Media gateway controller: The total number of NTFY commands 
         received that were responded to with a failure return code.
        "
    ::= { srcpPeerStatsEntry 11 }

--**********************************************************************
-- Conformance 
--**********************************************************************

-- 
-- conformance information
--

srcpMIBConformance OBJECT IDENTIFIER ::= { ciscoWanSrcpMIB 3 }

srcpMIBCompliances OBJECT IDENTIFIER ::= { srcpMIBConformance 1 }

srcpMIBGroups      OBJECT IDENTIFIER ::= { srcpMIBConformance 2 }


-- 
-- deprecated compliance statement
--

srcpMIBCompliance MODULE-COMPLIANCE
    STATUS  deprecated
    DESCRIPTION
            "The compliance statement for the SNMPv2 entities 
             which implement SRCP MIB."
    MODULE  -- this module
        MANDATORY-GROUPS { srcpConfigurationGroup,
                           srcpStatisticsGroup
                         }
    ::= { srcpMIBCompliances 1 }

srcpMIBComplaince2 MODULE-COMPLIANCE
     STATUS deprecated
     DESCRIPTION
           " The compliance  statement for the SNMPv2 entities
             which implement SRCP MIB."
     MODULE -- this module
          MANDATORY-GROUPS { srcpConfigurationGroup2,
                           srcpStatisticsGroup2
                         }
  ::= { srcpMIBCompliances 2 }

-- current complaince statements

srcpMIBComplaince3 MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "The compliance  statement for the SNMPv2 entities
             which implement SRCP MIB."
    MODULE -- this module
    MANDATORY-GROUPS { srcpConfigurationGroup3,
                       srcpStatisticsGroup2
                     }
    ::= { srcpMIBCompliances 3 }

--
-- units of conformance
--
-- deprecated Groups
--
srcpConfigurationGroup OBJECT-GROUP
	OBJECTS {
                srcpVersion,
                srcpPortNumber,
		srcpPeerName, 
		srcpPeerPortNumber, 
		srcpPeerHeartbeatInterval, 
		srcpPeerTimeSinceHeartbeat, 
                srcpPeerMaxPduSize
		}

    STATUS    deprecated
    DESCRIPTION
        "This group contains objects related to configuration 
        of SRCP.  Min Access of read only is permissible for 
        system providing only a fixed SRCP port."
    ::= { srcpMIBGroups 1 }

srcpStatisticsGroup OBJECT-GROUP
	OBJECTS {
                srcpStatsPeerName,
		packetsDiscardedCnts,
		augwCnts,
		aulnCnts,
		rqntCnts,
		ntfyCnts,
		augwFailCnts,
		aulnFailCnts,
		rqntFailCnts,
		ntfyFailCnts
		}

    STATUS    deprecated
    DESCRIPTION
        "This group contains the statistics per SRCP peer."
    ::= { srcpMIBGroups 2 }

srcpConfigurationGroup2 OBJECT-GROUP
        OBJECTS {
                srcpVersion,
                srcpPortNumber,
                srcpPeerName,
                srcpPeerPortNumber,
                srcpPeerHeartbeatInterval,
                srcpPeerTimeSinceHeartbeat,
                srcpPeerMaxPduSize,
                srcpRequestTimeOut,
                srcpRequestRetries,
                srcpRequestMaxTimeout
                }

    STATUS    deprecated
    DESCRIPTION
            "This group contains objects related to configuration 
            of SRCP. Min Access of read only is permissible for 
            system providing only a fixed SRCP port."
    ::= { srcpMIBGroups 3 }

srcpConfigurationGroup3 OBJECT-GROUP
        OBJECTS {
                srcpVersion,
                srcpPortNumber,
                srcpPeerName,
                srcpPeerPortNumber,
                srcpPeerGrpHeartbeatInterval,
                srcpPeerGrpTimeSinceHeartbeat,
                srcpPeerGrpMaxPduSize,
                srcpRequestTimeOut,
                srcpRequestRetries,
                srcpRequestMaxTimeout
                }
    
        STATUS  current
        DESCRIPTION
                "This group contains objects related to configuration 
                of SRCP.  Min Access of read only is permissible for 
                system providing only a fixed SRCP port."
        ::= { srcpMIBGroups 5 }

srcpStatisticsGroup2 OBJECT-GROUP
        OBJECTS {
                srcpStatsPeerName,
                packetsDiscardedCnts,
                augwCnts,
                aulnCnts,
                rqntCnts,
                ntfyCnts,
                augwFailCnts,
                aulnFailCnts,
                rqntFailCnts,
                ntfyFailCnts
                }

    STATUS    current
    DESCRIPTION
        "This group contains the statistics per SRCP peer."
    ::= { srcpMIBGroups 4 }

END