Shortcut Menu

Skip

Main Navigation

Choose your language


ActiveXperts Network Monitor supports SNMP based checks.It ships with free SNMP GET and SNMP TRAP utilities. It also offers many SNMP scripts (PowerShell and VBScript).

Use ActiveXperts Netork Monitor to monitor your virtualization servers, domains, computers and devices. It runs on a single Windows server, without agents required on the monitored systems. It has many built-in checks and also allows administrators to create custom checks using PowerShell, VBScript and SSH.


ENTERASYS-POLICY-PROFILE-MIB.mib object view, vendor Enterasys-Networks

Introduction

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.

ActiveXperts Network Monitor can import mib file ENTERASYS-POLICY-PROFILE-MIB and use it to monitor vendor specific OID's.

ENTERASYS-POLICY-PROFILE-MIB file content

Object view of ENTERASYS-POLICY-PROFILE-MIB:

Scalar Object
etsysPolicyProfileMaxEntries .1.3.6.1.4.1.5624.1.2.6.1.1
The maximum number of entries allowed in the etsysPolicyProfileTable.
etsysPolicyProfileNumEntries .1.3.6.1.4.1.5624.1.2.6.1.2
The current number of entries in the etsysPolicyProfileTable.
etsysPolicyProfileLastChange .1.3.6.1.4.1.5624.1.2.6.1.3
The sysUpTime at which the etsysPolicyProfileTable was last modified.
etsysPolicyProfileTableNextAvailableIndex .1.3.6.1.4.1.5624.1.2.6.1.4
This object indicates the numerically lowest available index within this entity, which may be used for the value of etsysPolicyProfileIndex in the creation of a new entry in the etsysPolicyProfileTable. An index is considered available if the index value falls within the range of 1 to 65535 and is not being used to index an existing entry in the etsysPolicyProfileTable contained within this entity. This value should only be considered a guideline for management creation of etsysPolicyProfileEntries, there is no requirement on management to create entries based upon this index value.
etsysPolicyProfileEntry .1.3.6.1.4.1.5624.1.2.6.1.5.1
Conceptually defines a particular entry within the etsysPolicyProfileTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets.
etsysPolicyClassificationMaxEntries .1.3.6.1.4.1.5624.1.2.6.2.1
The maximum number of entries allowed in the etsysPolicyClassificationTable.
etsysPolicyClassificationNumEntries .1.3.6.1.4.1.5624.1.2.6.2.2
The current number of entries in the etsysPolicyClassificationTable.
etsysPolicyClassificationLastChange .1.3.6.1.4.1.5624.1.2.6.2.3
The sysUpTime at which the etsysPolicyClassificationTable was last modified.
etsysPolicyClassificationEntry .1.3.6.1.4.1.5624.1.2.6.2.4.1
Describes a particular entry within the etsysPolicyClassificationTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets.
etsysPortPolicyProfileLastChange .1.3.6.1.4.1.5624.1.2.6.3.1
sysUpTime at which the etsysPortPolicyProfileTable was last modified.
etsysPortPolicyProfileEntry .1.3.6.1.4.1.5624.1.2.6.3.2.1
Describes a particular entry within the etsysPortPolicyProfileTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets.
etsysPortPolicyProfileSummaryEntry .1.3.6.1.4.1.5624.1.2.6.3.3.1
Conceptually defines a particular entry within the etsysPortPolicyProfileSummaryTable.
etsysStationPolicyProfileMaxEntries .1.3.6.1.4.1.5624.1.2.6.5.1
The maximum number of entries allowed in the etsysStationPolicyProfileTable. If this number is exceeded, based on stations connecting to the edge device, the oldest entries will be deleted.
etsysStationPolicyProfileNumEntries .1.3.6.1.4.1.5624.1.2.6.5.2
The current number of entries in the etsysStationPolicyProfileTable.
etsysStationPolicyProfileLastChange .1.3.6.1.4.1.5624.1.2.6.5.3
sysUpTime at which the etsysStationPolicyProfileTable was last modified.
etsysStationPolicyProfileEntry .1.3.6.1.4.1.5624.1.2.6.5.4.1
Describes a particular entry within the etsysStationPolicyProfileTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets.
etsysInvalidPolicyAction .1.3.6.1.4.1.5624.1.2.6.6.1
Specifies the action that the edge device should take if asked to apply an invalid or unknown policy. applyDefaultPolicy(1) - Apply the default policy for the port. dropPackets(2) - Block traffic. Although dropPackets(2) is the most secure option, it may not always be desirable.
etsysInvalidPolicyCount .1.3.6.1.4.1.5624.1.2.6.6.2
Increments to indicate the number of times the switch has detected an invalid/unknown policy.
etsysDevicePolicyProfileDefault .1.3.6.1.4.1.5624.1.2.6.8.1
If this value is non-zero, the value indicates the etsysPolicyProfileEntry (and its associated etsysPolicyClassificationTable entries) which should be used by the device if the device is incapable of using the profile (or specific parts of the profile) explicitly applied to an inbound frame. A value of zero indicates that no default profile is currently active.
etsysPolicyCapabilities .1.3.6.1.4.1.5624.1.2.6.9.1
A list of capabilities related to policies. A set bit, with the value 1, indicates support for the described functionality. A clear bit, with the value 0, indicates the described functionality is not supported.
etsysPolicyDynaPIDRuleCapabilities .1.3.6.1.4.1.5624.1.2.6.9.2
A list of rule types which are supported by this device for the purpose of dynamically assigning a profile to the network traffic described by the bit. A set bit, with the value 1, indicates support for the described functionality. A clear bit, with the value 0, indicates the described functionality is not supported.
etsysPolicyAdminPIDRuleCapabilities .1.3.6.1.4.1.5624.1.2.6.9.3
A list of rule types which are supported by this device for the purpose of administratively assigning a profile to the network traffic described by the bit. A set bit, with the value 1, indicates support for the described functionality. A clear bit, with the value 0, indicates the described functionality is not supported.
etsysPolicyVlanRuleCapabilities .1.3.6.1.4.1.5624.1.2.6.9.4
A list of rule types which are supported by this device for the purpose of assigning a VlanId to the network traffic described by the bit. A set bit, with the value 1, indicates support for the described functionality. A clear bit, with the value 0, indicates the described functionality is not supported.
etsysPolicyCosRuleCapabilities .1.3.6.1.4.1.5624.1.2.6.9.5
A list of rule types which are supported by this device for the purpose of assigning a CoS to the network traffic described by the bit. A set bit, with the value 1, indicates support for the described functionality. A clear bit, with the value 0, indicates the described functionality is not supported.
etsysPolicyDropRuleCapabilities .1.3.6.1.4.1.5624.1.2.6.9.6
A list of rule types which are supported by this device for the purpose of discarding the network traffic described by the bit. A set bit, with the value 1, indicates support for the described functionality. A clear bit, with the value 0, indicates the described functionality is not supported.
etsysPolicyForwardRuleCapabilities .1.3.6.1.4.1.5624.1.2.6.9.7
A list of rule types which are supported by this device for the purpose of forwarding the network traffic described by the bit. A set bit, with the value 1, indicates support for the described functionality. A clear bit, with the value 0, indicates the described functionality is not supported.
etsysPolicySyslogRuleCapabilities .1.3.6.1.4.1.5624.1.2.6.9.8
A list of rule types which are supported by this device for the purpose of issuing syslog messages when the rule is used to identify the network traffic described by the bit. A set bit, with the value 1, indicates support for the described functionality. A clear bit, with the value 0, indicates the described functionality is not supported.
etsysPolicyTrapRuleCapabilities .1.3.6.1.4.1.5624.1.2.6.9.9
A list of rule types which are supported by this device for the purpose of issuing an SNMP notify (trap) messages when the rule is used to identify the network traffic described by the bit. A set bit, with the value 1, indicates support for the described functionality. A clear bit, with the value 0, indicates the described functionality is not supported.
etsysPolicyDisablePortRuleCapabilities .1.3.6.1.4.1.5624.1.2.6.9.10
A list of rule types which are supported by this device for the purpose of disabling the ingress port identified when the rule matches the network traffic described by the bit. A set bit, with the value 1, indicates support for the described functionality. A clear bit, with the value 0, indicates the described functionality is not supported.
etsysPolicyMapMaxEntries .1.3.6.1.4.1.5624.1.2.6.10.1
The maximum number of entries allowed in the etsysPolicyMapTable.
etsysPolicyMapNumEntries .1.3.6.1.4.1.5624.1.2.6.10.2
The current number of entries in the etsysPolicyMapTable.
etsysPolicyMapLastChange .1.3.6.1.4.1.5624.1.2.6.10.3
The value of sysUpTime when the etsysPolicyMapTable was last modified.
etsysPolicyMapPvidOverRide .1.3.6.1.4.1.5624.1.2.6.10.4
This object defines whether the PVID specified in a RADIUS Tunnel-Private-Group-ID attribute for an Authenticated user shall override any statically configured PVID which may be provisioned as the default station-based policy may be applied. true(1) means that any port or station authorized with the RADIUS Tunnel-Private-Group-ID as PVID, will use the RADIUS- provisioned PVID value, when no matching entry for said PVID is found in the etsysPolicyMapTable. false(2) means that the RADIUS-provisioned PVID value will be applied only when no statically configured default PVID of the corresponding physical port exists and no matching entry for said PVID is found in the etsysPolicyMapTable. This mode provides backward compatibility with pre RFC 3580 UPN implementations.
etsysPolicyMapUnknownPvidPolicy .1.3.6.1.4.1.5624.1.2.6.10.5
Describes the selected behavior of the managed entity if the PVID specified in a RADIUS Tunnel-Private-Group-ID attribute is not found in the etsysPolicyMapTable.
etsysPolicyMapEntry .1.3.6.1.4.1.5624.1.2.6.10.6.1
Conceptually defines a particular entry within the etsysPolicyMapTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets.
etsysPolicyRulesMaxEntries .1.3.6.1.4.1.5624.1.2.6.11.1
The maximum number of entries allowed in the etsysPolicyRulesTable.
etsysPolicyRulesNumEntries .1.3.6.1.4.1.5624.1.2.6.11.2
The current number of entries in the etsysPolicyRulesTable.
etsysPolicyRulesLastChange .1.3.6.1.4.1.5624.1.2.6.11.3
The sysUpTime at which the etsysPolicyRulesTable was last modified.
etsysPolicyRulesAccountingEnable .1.3.6.1.4.1.5624.1.2.6.11.4
Controls the collection of rule usage statistics. If disabled, no usage statistics are gathered and no auditing messages will be sent. When enabled, rule will gather usage statistics, and auditing messages will be sent, if enabled for a given rule.
etsysPolicyRulesPortDisabledList .1.3.6.1.4.1.5624.1.2.6.11.5
A portlist containing bits representing the dot1dBridgePorts which have been disabled via the mechanism described in the etsysPolicyRuleDisablePort leaf. A set bit indicates a disabled port. Ports may be enabled by performing a set with the corresponding bit cleared. Bits which are set will be ignored during the set operation.
etsysPolicyRuleEntry .1.3.6.1.4.1.5624.1.2.6.11.6.1
Describes a particular entry within the etsysPolicyRuleTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets.
etsysPolicyRulePortEntry .1.3.6.1.4.1.5624.1.2.6.11.7.1
.
etsysPolicyRuleDynamicProfileAssignmentOverride .1.3.6.1.4.1.5624.1.2.6.11.8
If true, administratively assigned profile assignment rules override dynamically assigned profiles assignments for a given rule. If false, the dynamically assigned value (typically created by a successful authentication attempt) overrides the administratively configured value. The agent may optionally implement this leaf as read-only.
etsysPolicyRuleDefaultDynamicSyslogStatus .1.3.6.1.4.1.5624.1.2.6.11.9
If enabled(1), rules dynamically created will set etsysPolicyRuleAuditSyslogEnable to enabled. If disabled(2) a dynamically created rule will have etsysPolicyRuleAuditSyslogEnable set to disabled. The agent may optionally implement this leaf as read-only.
etsysPolicyRuleDefaultDynamicTrapStatus .1.3.6.1.4.1.5624.1.2.6.11.10
If enabled(1), rules dynamically created will set etsysPolicyRuleAuditTrapEnable to enabled. If disabled(2) a dynamically created rule will have etsysPolicyRuleAuditTrapEnable set to disabled. The agent may optionally implement this leaf as read-only.
Tabular Object
etsysPolicyProfileIndex .1.3.6.1.4.1.5624.1.2.6.1.5.1.1
A unique arbitrary identifier for this Policy. Since a policy will be applied to a user regardless of his or her location in the network fabric policy names SHOULD be unique within the entire network fabric. Policy IDs and policy names MUST be unique within the scope of a single managed entity.
etsysPolicyProfileName .1.3.6.1.4.1.5624.1.2.6.1.5.1.2
Administratively assigned textual description of this Policy. This object MUST NOT be modifiable while this entry's RowStatus is active(1).
etsysPolicyProfileRowStatus .1.3.6.1.4.1.5624.1.2.6.1.5.1.3
This object allows for the dynamic creation and deletion of entries within the etsysPolicyProfileTable as well as the activation and deactivation of these entries. When this object's value is active(1) the corresponding row's etsysPolicyProfilePortVid, etsysPolicyProfilePriority, and all entries within the etsysPolicyClassificationTable indexed by this row's etsysPolicyProfileIndex are available to be applied to network access ports or stations on the managed entity. All ports corresponding to rows within the etsysPortPolicyProfileTable whose etsysPortPolicyProfileOperID is equal to the etsysPolicyProfileIndex, shall have the corresponding policy applied. Likewise, all stations corresponding to rows within the etsysStationPolicyProfileTable whose etsysStationPolicyProfileOperID is equal to the etsysPolicyProfileIndex, shall have the corresponding policy applied. The value of etsysPortPolicyProfileOperID for each such row in the etsysPortPolicyProfileTable will be equal to the etsysPortPolicyProfileAdminID, unless the authorization information from a source such as a RADIUS server indicates to the contrary. Refer to the specific objects within this MIB as well as well as RFC2674, the CTRON-PRIORITY-CLASSIFY-MIB, the CTRON-VLAN-CLASSIFY-MIB, and the CTRON-RATE-POLICING-MIB for a complete explanation of the application and behavior of these objects. When this object's value is set to notInService(2) this policy will not be applied to any rows within the etsysPortPolicyProfileTable. To allow policy profiles to be applied for security implementations, setting this object's value from active(1) to notInService(2) or destroy(6) SHALL fail if one or more instances of etsysPortPolicyProfileOperID or etsysStationPolicyProfileOperID currently reference this entry's associated policy due to a set by an underlying security protocol such as RADIUS. For network functionality and clarity, setting this object to destroy(6) SHALL fail if one or more instances of etsysPortPolicyProfileOperID or etsysStationPolicyProfileOperID currently references this entry's etsysPolicyProfileIndex. Refer to the RowStatus convention for further details on the behavior of this object.
etsysPolicyProfilePortVidStatus .1.3.6.1.4.1.5624.1.2.6.1.5.1.4
This object defines whether a PVID override should be applied to ports which have this profile active. enabled(1) means that any port with this policy active will have this row's etsysPolicyProfilePortVid applied to untagged frames or priority-tagged frames received on this port. disabled(2) means that etsysPolicyProfilePortVid will not be applied. When this object is set to disabled(2) the value of etsysPolicyProfilePortVid has no meaning.
etsysPolicyProfilePortVid .1.3.6.1.4.1.5624.1.2.6.1.5.1.5
This object defines the PVID of this profile. If a port has an active policy and the policy's etsysPolicyProfilePortVidStatus is set to enabled(1), the etsysPolicyProfilePortVid will be applied to all untagged frames arriving on the port that do not match any of the policy classification rules. Note that the 802.1Q PVID will still exist from a management view but will NEVER be applied to traffic arriving on a port that has an active policy and enabled etsysPolicyProfilePortVid defined, since policy is applied to traffic arriving on the port prior to the assignment of a VLAN using the 802.1Q PVID. The behavior of an enabled etsysPolicyProfilePortVid on any associated port SHALL be identical to the behavior of the dot1qPvid upon that port. Note that two special, otherwise illegal, values of the etsysPolicyProfilePortVid are used in defining the default forwarding actions, to be used in conjunction with policy classification rules, and do not result in packet tagging: 0 Indicates that the default forwarding action is to drop all packets that do not match an explicit rule. 4095 Indicates that the default forwarding action is to forward any packets not matching any explicit rules.
etsysPolicyProfilePriorityStatus .1.3.6.1.4.1.5624.1.2.6.1.5.1.6
This object defines whether a priority override should be applied to ports which have this profile active. enabled(1) means that any port with this policy active will have etsysPolicyProfilePriority applied to this port. disabled(2) means that etsysPolicyProfilePriority will not be applied. When this object is set to disabled(2) the value of etsysPolicyProfilePriority has no meaning.
etsysPolicyProfilePriority .1.3.6.1.4.1.5624.1.2.6.1.5.1.7
This object defines the default ingress priority of this profile. If a port has an active policy and the policy's etsysPolicyProfilePriorityStatus is set to enabled(1), the etsysPolicyProfilePriority will be applied to all packets arriving on the port that do not match any of the policy classification rules. Note that dot1dPortDefaultUserPriority will still exist from a management view but will NEVER be applied to traffic arriving on a port that has an active policy and enabled etsysPolicyProfilePriority defined, since policy is applied to traffic arriving on the port prior to the assignment of a priority using dot1dPortDefaultUserPriority. The behavior of an enabled etsysPolicyProfilePriority on any associated port SHALL be identical to the behavior of the dot1dPortDefaultUserPriority upon that port.
etsysPolicyProfileEgressVlans .1.3.6.1.4.1.5624.1.2.6.1.5.1.8
The set of VLANs which are assigned by this policy to egress on ports for which this policy is active. Changes to a bit in this object affect the per-port per-VLAN Registrar control for Registration Fixed for the relevant GVRP state machine on each port for which this policy is active. A VLAN may not be added in this set if it is already a member of the set of VLANs in etsysPolicyProfileForbiddenVlans. This object is superseded on a per-port per-VLAN basis by any 'set' bits in dot1qVlanStaticEgressPorts and dot1qVlanForbiddenEgressPorts. The default value of this object is a string of zeros.
etsysPolicyProfileForbiddenVlans .1.3.6.1.4.1.5624.1.2.6.1.5.1.9
The set of VLANs which are prohibited by this policy to egress on ports for which this policy is active. Changes to this object that cause a port to be included or excluded affect the per-port per-VLAN Registrar control for Registration Forbidden for the relevant GVRP state machine on each port for which this policy is active. A VLAN may not be added in this set if it is already a member of the set of VLANs in etsysPolicyProfileEgressVlans. This object is superseded on a per-port per-VLAN basis by any 'set' bits in the dot1qVlanStaticEgressPorts and dot1qVlanForbiddenEgressPorts. The default value of this object is a string of zeros.
etsysPolicyProfileUntaggedVlans .1.3.6.1.4.1.5624.1.2.6.1.5.1.10
The set of VLANs which should transmit egress packets as untagged on ports for which this policy is active. This object is superseded on a per-port per-VLAN basis by any 'set' bits in dot1qVlanStaticUntaggedPorts.
etsysPolicyProfileOverwriteTCI .1.3.6.1.4.1.5624.1.2.6.1.5.1.11
If set, the information contained within the TCI field of inbound, tagged packets will not be used by the device after the ingress classification stage of packet relay. The net effect will be that the TCI information may be used to classify the packet, but will be overwritten (and ignored) by subsequent stages of packet relay.
etsysPolicyProfileRulePrecedence .1.3.6.1.4.1.5624.1.2.6.1.5.1.12
Each octet will contain a single value representing the rule type to be matched against, defined by the PolicyClassificationRuleType textual convention. When read, will return the currently operating rule matching precedence, ordered from first consulted (in the first octet) to last consulted (in the last octet). A set of a single octet of 0x00 will result in a reversion to the default precedence ordering. A set of any other values will result in the specified rule types being matched in the order specified, followed by the remaining rules, in default precedence order.
etsysPolicyClassificationIndex .1.3.6.1.4.1.5624.1.2.6.2.4.1.1
Administratively assigned unique value, greater than zero. Each etsysPolicyClassificationIndex instance MUST be unique within the scope of its associated etsysPolicyProfileIndex.
etsysPolicyClassificationOID .1.3.6.1.4.1.5624.1.2.6.2.4.1.2
This object follows the RowPointer textual convention and is an OID reference to a classification rule. This object MUST NOT be modifiable while this entry's etsysPolicyClassificationStatus object has a value of active(1).
etsysPolicyClassificationRowStatus .1.3.6.1.4.1.5624.1.2.6.2.4.1.3
The status of this row. When set to active(1) this entry's classification rule, as referenced by etsysPolicyClassificationOID, becomes one of its associated policy's set of rules. When this entry's associated policy, as defined by etsysPolicyProfileIndex, is active and assigned to a port through the etsysPortPolicyProfileTable or to a station through the etsysStationPolicyProfileTabbe, this classification rule will be applied to the port or station. The exact behavior of this application depends upon the classification rule. When this object is set to notInService(2) or notReady(3) this entry is not considered one of its associated policy's set of rules and this classification rule will not be applied. An entry MAY NOT be set to active(1) unless this row's etsysPolicyClassificationOID is set to a valid classification rule.
etsysPolicyClassificationIngressList .1.3.6.1.4.1.5624.1.2.6.2.4.1.4
The ports on which an active policy profile has defined this classification rule applies.
etsysPortPolicyProfileIndexType .1.3.6.1.4.1.5624.1.2.6.3.2.1.1
This object defines the specific type of port this entry represents.
etsysPortPolicyProfileIndex .1.3.6.1.4.1.5624.1.2.6.3.2.1.2
An index value which represents a unique port of the type defined by this entry's etsysPortPolicyProfileIndexType.
etsysPortPolicyProfileAdminID .1.3.6.1.4.1.5624.1.2.6.3.2.1.3
This object represents the desired Policy Profile for this dot1dBasePort or this ifIndex. Setting this object to any value besides zero (0) should, if possible, immediately place this entry's dot1dBasePort or ifIndex into the given Policy Profile. This object and etsysPortPolicyProfileOperID may not be the same if this object is set to a Policy (i.e. an instance of the etsysPolicyProfileTable) which is not in an active state or if the etsysPortPolicyProfileOperID has been set by an underlying security protocol such as RADIUS.
etsysPortPolicyProfileOperID .1.3.6.1.4.1.5624.1.2.6.3.2.1.4
This object is the current policy which is being applied to this entry's dot1dBasePort. A value of zero(0) indicates there is no policy being applied to this dot1dBasePort or this ifIndex. If the value of this object has been set by an underlying security protocol such as RADIUS, sets to this entry's etsysPortPolicyProfileAdminID MUST NOT change the value of this object until such time as the security protocol releases this object by setting it to a value of zero (0).
etsysPortPolicyProfileSummaryIndexType .1.3.6.1.4.1.5624.1.2.6.3.3.1.1
This object defines the specific type of port this entry represents.
etsysPortPolicyProfileSummaryAdminID .1.3.6.1.4.1.5624.1.2.6.3.3.1.2
An aggregate list of all Ports currently supporting rules which assign this profileIndex through administrative means. Rules of this type have a valid etsysPolicyRuleResult2 action and a profileIndex of 0.
etsysPortPolicyProfileSummaryOperID .1.3.6.1.4.1.5624.1.2.6.3.3.1.3
An aggregate list of all Ports currently supporting rules which assign this profileIndex through either an administrative or dynamic means. The profileId which will be assigned operationally, as frames are handled are too be reported here.
etsysPortPolicyProfileSummaryDynamicID .1.3.6.1.4.1.5624.1.2.6.3.3.1.4
An aggregate list of all Ports currently supporting rules which assign this profileIndex through a dynamic means. For example the profileIndex returned via a successful 802.1X supplicant authentication.
etsysStationPolicyProfileIndex .1.3.6.1.4.1.5624.1.2.6.5.4.1.2
An index value which represents a unique station entry.
etsysStationIdentifierType .1.3.6.1.4.1.5624.1.2.6.5.4.1.3
Indicates the type of station identifying address contained in etsysStationIdentifier.
etsysStationIdentifier .1.3.6.1.4.1.5624.1.2.6.5.4.1.4
A value which represents a unique MAC Address, IP Address, or other identifying address for a station, or other logical and authenticatable sub-entity within a station, connected to a port.
etsysStationPolicyProfileOperID .1.3.6.1.4.1.5624.1.2.6.5.4.1.5
This object is the current policy which is being applied to this entry's MAC Address. A value of zero(0) indicates there is no policy being applied to this MAC Address. The value of this object reflects either the setting from an underlying AAA service such as RADIUS, or the default setting based on the etsysPortPolicyProfileAdminID for the port on which the station is connected. This object and the corresponding etsysPortPolicyProfileAdminID will not be the same if this object has been set by an underlying security protocol such as RADIUS.
etsysStationPolicyProfilePortType .1.3.6.1.4.1.5624.1.2.6.5.4.1.6
A textual convention that defines the specific type of port designator the corresponding entry represents.
etsysStationPolicyProfilePortID .1.3.6.1.4.1.5624.1.2.6.5.4.1.7
A value which represents the physical port, of the type defined by this entry's etsysStationPolicyProfilePortType, on which the associated station entity is connected. This object is for convenience in cross referencing stations to ports.
etsysPolicyMapIndex .1.3.6.1.4.1.5624.1.2.6.10.6.1.1
A unique arbitrary identifier for this mapping entry.
etsysPolicyMapRowStatus .1.3.6.1.4.1.5624.1.2.6.10.6.1.2
This object allows for the dynamic creation and deletion of entries within the etsysPolicyMapTable as well as the activation and deactivation of these entries.
etsysPolicyMapStartVid .1.3.6.1.4.1.5624.1.2.6.10.6.1.3
This object defines the PVID of this profile or the starting PVID of a PVID range. This value is typically determined by authorization information, such as the PVID value from the Tunnel-Private-Group-ID RADIUS attribute. This value, together with the ending value of the range, in any, is typically used as the look-up key for a PVID to Policy Index mapping operation.
etsysPolicyMapEndVid .1.3.6.1.4.1.5624.1.2.6.10.6.1.4
This object defines the ending PVID of a PVID range. If the value of this object is identical to the value of etsysPolicyMapStartVid within the same conceptual table row, then the entry corresponds to a single PVID value.
etsysPolicyMapPolicyIndex .1.3.6.1.4.1.5624.1.2.6.10.6.1.5
The index of a Policy as defined in the etsysPolicyProfileTable. A value of 0 indicates that the mapping defined by this row entry is the NULL mapping, and that the PVID is to be applied as a traditional PVID. A non-zero value of this object indicates that the PVID provisioned (e.g. from the Tunnel-Private-Group-ID RADIUS attribute) should be mapped to a Policy as defined in the etsysPolicyProfileTable, and that policy applied as if the Policy name had been provisioned instead (e.g, in the Filter-ID RADIUS attribute), providing, of course, that the etsysPolicyProfileRowStatus value of the table row so indexed is active (1).
etsysPolicyRuleProfileIndex .1.3.6.1.4.1.5624.1.2.6.11.6.1.1
The etsysPolicyProfileIndex for which the rule is defined. A value of zero(0) has special meaning in that it scopes rules which are used to determine the Policy Profile to which the frame belongs. See the etsysPolicyRuleResult1 and etsysPolicyRuleResult2 descriptions for specifics of how the results of a rule hit differ when the etsysPolicyRuleProfileIndex is zero.
etsysPolicyRuleType .1.3.6.1.4.1.5624.1.2.6.11.6.1.2
The type of network traffic reference by the etsysPolicyRuleData.
etsysPolicyRuleData .1.3.6.1.4.1.5624.1.2.6.11.6.1.3
The data pattern to match against, as defined by the etsysPolicyRuleType, encoded in network-byte order.
etsysPolicyRulePrefixBits .1.3.6.1.4.1.5624.1.2.6.11.6.1.4
The relevant number of bits defined by the etsysPolicyRuleData, to be used when matching against a frame, relevant bits are specified in longest-prefix-first style (left to right). A value of zero carries the special meaning of all bits are relevant.
etsysPolicyRulePortType .1.3.6.1.4.1.5624.1.2.6.11.6.1.5
The port number on which the rule will be applied. Zero(0) is a special case, indicating that the rule should be applied to all ports.
etsysPolicyRulePort .1.3.6.1.4.1.5624.1.2.6.11.6.1.6
The port number on which the rule will be applied. Zero(0) is a special case, indicating that the rule should be applied to all ports.
etsysPolicyRuleRowStatus .1.3.6.1.4.1.5624.1.2.6.11.6.1.7
The status of this row. When set to active(1) this entry's classification rule, as referenced by etsysPolicyRulesOID, becomes one of its associated policy's set of rules. When this entry's associated policy, as defined by etsysPolicyRuleProfileIndex, is active and assigned to a port through the etsysPortPolicyProfileTable or to a station through the etsysStationPolicyProfileTabbe, this classification rule will be applied to the port or station. The exact behavior of this application depends upon the classification rule. When this object is set to notInService(2) or notReady(3) this entry is not considered one of its associated policy's set of rules and this classification rule will not be applied.
etsysPolicyRuleStorageType .1.3.6.1.4.1.5624.1.2.6.11.6.1.8
The storage type of this row. When set to volatile(1) this entry's classification rule, as referenced by etsysPolicyRulesOID, will be removed (if present) from non-volatile storage. Rows created dynamically by the device will typically report this as their default storage type. When set to nonVolatile(1) this entry's classification rule, as referenced by etsysPolicyRulesOID, will be added to non-volatile storage. This is the default value for rows created as the result of external management. Values of other(0), permanent(4), and readOnly(5) may not be set, although they may be returned for rows created by the device.
etsysPolicyRuleUsageList .1.3.6.1.4.1.5624.1.2.6.11.6.1.9
When read, a set bit indicates that this rule was used to classify traffic on the corresponding port. When set, the native PortList will be bit-wise AND'ed with the set PortList, allowing the agent to clear the usage indication.
etsysPolicyRuleResult1 .1.3.6.1.4.1.5624.1.2.6.11.6.1.10
If the etsysPolicyRuleProfileIndex is 0 then this field is read-only and defines the profile ID which will assigned to frames matching this rule. This is the dynamically assigned value and may differ from the administratively configured value. If the etsysPolicyRuleProfileIndex is not 0 then this field is read-create and defines the VLAN ID with which to mark a frame matching this PolicyRule. Note that three special, otherwise illegal, values of the etsysPolicyRuleVlan are used in defining the forwarding action. -1 Indicates that no VLAN or forwarding behavior modification is desired. A rule will not be matched against for the purpose of determining a marking VID if this value is set. 0 Indicates that the default forwarding action is to drop the packets matching this rule. 4095 Indicates that the default forwarding action is to forward any packets matching this rule.
etsysPolicyRuleResult2 .1.3.6.1.4.1.5624.1.2.6.11.6.1.11
If the etsysPolicyRuleProfileIndex is 0 then this field is read-create and defines the profile ID which the managing entity desires assigned to frames matching this rule. This is the administrative value and may differ from the dynamically assigned active value. If the etsysPolicyRuleProfileIndex is not 0 then this field is The CoS with which to mark a frame matching this PolicyRule. Note that one special, otherwise illegal, values of the etsysPolicyRuleCoS are used in defining the forwarding action. -1 Indicates that no CoS or forwarding behavior modification is desired. A rule will not be matched against for the purpose of determining a CoS if this value is set.
etsysPolicyRuleAuditSyslogEnable .1.3.6.1.4.1.5624.1.2.6.11.6.1.12
Controls the sending of a syslog message when a bit in the etsysPolicyRuleUsageList transitions from 0 to 1.
etsysPolicyRuleAuditTrapEnable .1.3.6.1.4.1.5624.1.2.6.11.6.1.13
Controls the sending of an SNMP NOTIFICATION when a bit in the etsysPolicyRuleUsageList transitions from 0 to 1.
etsysPolicyRuleDisablePort .1.3.6.1.4.1.5624.1.2.6.11.6.1.14
Controls the disabling of a port (ifOperStatus of the corresponding ifIndex will be down) when a bit in the etsysPolicyRuleUsageList transitions from 0 to 1. When set to enabled, the corresponding ifIndex will be disabled upon the transition.
etsysPolicyRuleOperPid .1.3.6.1.4.1.5624.1.2.6.11.6.1.15
If the etsysPolicyRuleProfileIndex is 0 then this field contains the currently applied profile ID for frames matching this rule. This may be either the administratively applied value or the dynamically applied value. If the etsysPolicyRuleProfileIndex is not 0, then this object does not exist and will not be returned. Note that one special, otherwise illegal, values of the etsysPolicyRuleCoS are used in defining the forwarding action. -1 Indicates that no profile ID is being applied by this rule.
etsysPolicyRulePortHit .1.3.6.1.4.1.5624.1.2.6.11.7.1.1
Every row will report a value of True, indicating that the Rule described by the instancing was used on the given port. An agent may be set this leaf to False to clear remove the row and clear the Rule Use bit for the specified Rule, on the given bridgePort.
Table
etsysPolicyProfileTable .1.3.6.1.4.1.5624.1.2.6.1.5
A table containing policy profiles. A policy is a group of classification rules which may be applied on a per user basis, to ports or to stations.
etsysPolicyClassificationTable .1.3.6.1.4.1.5624.1.2.6.2.4
A table containing reference OIDs to entries within the classification tables. These classification tables include but may not be limited to: ctPriClassifyTable ctVlanClassifyTable ctRatePolicyingConfigTable This table is used to map a list of classification rules to an instance of the etsysPolicyProfileTable.
etsysPortPolicyProfileTable .1.3.6.1.4.1.5624.1.2.6.3.2
This table allows for a one to one mapping between a dot1dBasePort or an ifIndex and a Policy Profile.
etsysPortPolicyProfileSummaryTable .1.3.6.1.4.1.5624.1.2.6.3.3
This table provides aggregate port information on a per policy, per port type basis.
etsysStationPolicyProfileTable .1.3.6.1.4.1.5624.1.2.6.5.4
This table allows for a one to one mapping between a station's identifying address and a Policy Profile.
etsysPolicyMapTable .1.3.6.1.4.1.5624.1.2.6.10.6
A table containing VLAN ID to policy mappings. A policy is a group of classification rules which may be applied on a per user basis, to ports or to stations.
etsysPolicyRuleTable .1.3.6.1.4.1.5624.1.2.6.11.6
A table containing rules bound to individual policies. A Rule is comprised of three components, a unique description of the network traffic, an associated list of actions, and an associated list of accounting and auditing controls and information. The unique description of the network traffic, defined by a PolicyClassificationRuleType together with a length, matching data and a relevant bits field, port type, and port number (port number zero is reserved to mean any port), and scoped by a etsysPolicyProfileIndex, is used as the table index.
etsysPolicyRulePortTable .1.3.6.1.4.1.5624.1.2.6.11.7
The purpose of this table is to provide an agent the ability to easily determine which rules have been used on a given bridge port. A row will only be present when the rule which the instancing describes has been used. The agent may remove a row (and clear the used status) by setting the etsysPolicyRulePortHit leaf to False. PolicyClassificationRuleType together with a length, matching data and a relevant bits field, port type, and port number (port number zero is reserved to mean any port), scoped by a etsysPolicyRuleProfileIndex, and preceded by a dot1dBasePort is used as the table index.
Object Identifier
etsysPolicyProfileMIB .1.3.6.1.4.1.5624.1.2.6
This MIB module defines a portion of the SNMP enterprise MIBs under the Enterasys enterprise OID pertaining to the mapping of per user policy profiles for Enterasys network edge devices or access products.
etsysPolicyProfile .1.3.6.1.4.1.5624.1.2.6.1
etsysPolicyClassification .1.3.6.1.4.1.5624.1.2.6.2
etsysPortPolicyProfile .1.3.6.1.4.1.5624.1.2.6.3
etsysPolicyVlanEgress .1.3.6.1.4.1.5624.1.2.6.4
etsysStationPolicyProfile .1.3.6.1.4.1.5624.1.2.6.5
etsysInvalidPolicyPolicy .1.3.6.1.4.1.5624.1.2.6.6
etsysDevicePolicyProfile .1.3.6.1.4.1.5624.1.2.6.8
etsysPolicyCapability .1.3.6.1.4.1.5624.1.2.6.9
etsysPolicyMap .1.3.6.1.4.1.5624.1.2.6.10
etsysPolicyRules .1.3.6.1.4.1.5624.1.2.6.11
etsysPolicyProfileConformance .1.3.6.1.4.1.5624.1.2.6.7
etsysPolicyProfileGroups .1.3.6.1.4.1.5624.1.2.6.7.1
etsysPolicyProfileCompliances .1.3.6.1.4.1.5624.1.2.6.7.2
Group
etsysPolicyProfileGroup .1.3.6.1.4.1.5624.1.2.6.7.1.1
A collection of objects providing Policy Profile Creation.
etsysPolicyClassificationGroup .1.3.6.1.4.1.5624.1.2.6.7.1.2
A collection of objects providing a mapping between a set of Classification Rules and a Policy Profile.
etsysPortPolicyProfileGroup .1.3.6.1.4.1.5624.1.2.6.7.1.3
A collection of objects providing a mapping from a specific port to a Policy Profile instance. Only the read-only portions of this group are now current. They are listed under etsysPortPolicyProfileGroup2.
etsysStationPolicyProfileGroup .1.3.6.1.4.1.5624.1.2.6.7.1.5
A collection of objects providing a mapping from a specific station to a Policy Profile instance.
etsysInvalidPolicyPolicyGroup .1.3.6.1.4.1.5624.1.2.6.7.1.6
A collection of objects that help to define a mapping from logical authorization services outcomes to access control and policy actions.
etsysDevicePolicyProfileGroup .1.3.6.1.4.1.5624.1.2.6.7.1.7
An object that provides a device level supplemental policy for entities that are not able to apply portions of the profile definition uniquely on individual ports.
etsysPolicyCapabilitiesGroup .1.3.6.1.4.1.5624.1.2.6.7.1.8
An object that indicates the capabilities of the managed entity with respect to Policy Profiles.
etsysPolicyMapGroup .1.3.6.1.4.1.5624.1.2.6.7.1.9
An object group that provides support for mapping between RFC 3580 style VLAN-policy and Enterasys UPN-policy based on named roles.
etsysPolicyRulesGroup .1.3.6.1.4.1.5624.1.2.6.7.1.10
An object that indicates the capabilities of the managed entity with respect to Policy Profiles.
etsysPortPolicyProfileGroup2 .1.3.6.1.4.1.5624.1.2.6.7.1.11
A collection of objects providing a mapping from a specific port to a Policy Profile instance.