Shortcut Menu

Skip

Main Navigation

Choose your language

You are here:

ActiveXperts.com > Administration > MIB > Cisco > CISCO-ICSUDSU-MIB

ActiveXperts Network Monitor supports SNMP based checks.It ships with free SNMP GET and SNMP TRAP utilities. It also offers many SNMP scripts (PowerShell and VBScript).

Use ActiveXperts Netork Monitor to monitor your virtualization servers, domains, computers and devices. It runs on a single Windows server, without agents required on the monitored systems. It has many built-in checks and also allows administrators to create custom checks using PowerShell, VBScript and SSH.


CISCO-ICSUDSU-MIB by vendor Cisco

CISCO-ICSUDSU-MIB file content

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.


Vendor: Cisco
Mib: CISCO-ICSUDSU-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor [download]    (ships with advanced SNMP/MIB tools)
-- *****************************************************************
-- CISCO-ICSUDSU-MIB.my: Integrated CSU/DSU MIB file
--
-- March 1996, David Williams
--
-- Copyright (c) 1996 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-ICSUDSU-MIB
DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY,
        OBJECT-TYPE,
        NOTIFICATION-TYPE,
        Counter32,
        Integer32,
        TimeTicks
                FROM SNMPv2-SMI
        DisplayString,
        TruthValue,
        TimeStamp
                FROM SNMPv2-TC
        MODULE-COMPLIANCE,
        OBJECT-GROUP
                FROM SNMPv2-CONF
        ifIndex
                FROM RFC1213-MIB
        dsx1ConfigEntry
                FROM RFC1406-MIB
        ciscoMgmt
                FROM CISCO-SMI;


ciscoICsuDsuMIB MODULE-IDENTITY
        LAST-UPDATED    "9601210000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 W. Tasman Drive
                        San Jose, CA  95134
                        USA

                Tel: +1 800 553-NETS

                E-mail: cs-snmp@cisco.com"
        DESCRIPTION
                "Integrated CSU/DSU MIB module.  For T1 and Switched 56 kbps
                        interfaces."
        ::= { ciscoMgmt 44 }

ciscoICsuDsuObjects        OBJECT IDENTIFIER ::= { ciscoICsuDsuMIB 1 }

ciscoICsuDsuGeneral        OBJECT IDENTIFIER ::= { ciscoICsuDsuObjects 1 }

ciscoICsuDsuT1             OBJECT IDENTIFIER ::= { ciscoICsuDsuObjects 2 }

ciscoICsuDsuSw56k          OBJECT IDENTIFIER ::= { ciscoICsuDsuObjects 3 }


--****************************************************************************
-- The CSU/DSU Static Configuration Group
--****************************************************************************

ciscoICsuDsuStaticConfigTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CiscoICsuDsuStaticConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
                "The CSU/DSU Static Configuration Table.  Contains items
                that are statically configured and can not be changed by end
                user without physically changing the CSU/DSU."
        ::= { ciscoICsuDsuGeneral 1 }

ciscoICsuDsuStaticConfigEntry OBJECT-TYPE
        SYNTAX      CiscoICsuDsuStaticConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
                "An entry in the static configuration table for each
                integrated CSU/DSU."
        INDEX   { ifIndex }
        ::= { ciscoICsuDsuStaticConfigTable 1 }

CiscoICsuDsuStaticConfigEntry ::=
        SEQUENCE {
                ciscoICsuDsuType                  INTEGER,
                ciscoICsuDsuHwRevision            DisplayString (SIZE (1..16)),
                ciscoICsuDsuSwRevision            DisplayString (SIZE (1..16)),
                ciscoICsuDsuProtocolRevision      DisplayString (SIZE (1..16))
         }

ciscoICsuDsuType OBJECT-TYPE
        SYNTAX INTEGER {
                fractionalT1         (1),
                twoWireSwitched56k   (2),
                fourWireSwitched56k  (3),
                unknown              (4)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "Specifies the type of line interface or CSU/DSU."
        ::= { ciscoICsuDsuStaticConfigEntry 1 }

ciscoICsuDsuHwRevision OBJECT-TYPE
        SYNTAX     DisplayString (SIZE (1..16))
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "The CSU/DSU hardware revision."
        ::= { ciscoICsuDsuStaticConfigEntry 2 }

ciscoICsuDsuSwRevision OBJECT-TYPE
        SYNTAX     DisplayString (SIZE (1..16))
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "The CSU/DSU software revision."
        ::= { ciscoICsuDsuStaticConfigEntry 3 }

ciscoICsuDsuProtocolRevision OBJECT-TYPE
        SYNTAX     DisplayString (SIZE (1..16))
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "The Protocol Revision of the CSU/DSU."
        ::= { ciscoICsuDsuStaticConfigEntry 4 }



--****************************************************************************
-- The CSU/DSU Test Report Group
--****************************************************************************

ciscoICsuDsuTestReportTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CiscoICsuDsuTestReportEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
                "The CSU/DSU test report Table.  Contains the results of user
                initiated tests, including selftest, reset, and loopback."
        ::= { ciscoICsuDsuGeneral 2 }

ciscoICsuDsuTestReportEntry OBJECT-TYPE
        SYNTAX      CiscoICsuDsuTestReportEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
                "An entry in the test report table for each integrated 
                CSU/DSU."
        INDEX   { ifIndex }
        ::= { ciscoICsuDsuTestReportTable 1 }

CiscoICsuDsuTestReportEntry ::=
        SEQUENCE {
                ciscoICsuDsuLastSelfTestResult    Integer32,
                ciscoICsuDsuTimeOfLastSelfTest    TimeStamp,
                ciscoICsuDsuNumResets             Counter32,
                ciscoICsuDsuTimeOfLastReset       TimeStamp,
                ciscoICsuDsuLoopbackStatus        INTEGER,
                ciscoICsuDsuLoopbackNumErrors     Integer32,
                ciscoICsuDsuLoopbackDuration      TimeTicks,
                ciscoICsuDsuLoopbackPoint         INTEGER,
                ciscoICsuDsuLoopbackPattern       INTEGER,
                ciscoICsuDsuUserDefinedPattern    DisplayString (SIZE (1..24)),
                ciscoICsuDsuLoopbackCode          INTEGER,
                ciscoICsuDsuEndTimeOfLastLoopback TimeStamp
        }

ciscoICsuDsuLastSelfTestResult OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "The result of the last self test.  Represented as a sum of 
                a bit map.  The variable bit positions are:
                1 - Flash Checksum bad.  Catastrophic error.
                2 - EPROM Checksum bad.  Catastrophic error.
                4 - RAM Tests failed.  Catastrophic error.
                8 - ROM Checksum bad.  Catastrophic error.
                16 - DteLoss.  Could not put DTE into loopback.  
                        NonCatastrophic error. 
                32 - patternLossDuringTest.  Put DTE into loopback but found 
                        BERT errors.  NonCatastrophic error."
        ::= { ciscoICsuDsuTestReportEntry 1 }

ciscoICsuDsuTimeOfLastSelfTest OBJECT-TYPE
        SYNTAX     TimeStamp
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "SysUpTime of LastSelfTest execution."
        ::= { ciscoICsuDsuTestReportEntry 2 }

ciscoICsuDsuNumResets OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "Number of times CSU/DSU has been reset."
        ::= { ciscoICsuDsuTestReportEntry 3 }

ciscoICsuDsuTimeOfLastReset OBJECT-TYPE
        SYNTAX     TimeStamp
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "SysUpTime of last CSU/DSU reset."
        ::= { ciscoICsuDsuTestReportEntry 4 }

ciscoICsuDsuLoopbackStatus OBJECT-TYPE
        SYNTAX INTEGER {
                completed      		(1),
                inProgress     		(2),
                neverPerformed 		(3),
                failed         		(4),
                noSyncWithTestPattern	(5)
        }
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "Current Status of Loopback.  Remaining Loopback results
                are valid only if status is 'completed' or 'failed' or
                'noSyncWithTestPattern'."
        ::= { ciscoICsuDsuTestReportEntry 5 }

ciscoICsuDsuLoopbackNumErrors OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "Number of Bit errors that occurred in last successful loopback 
                test.  Valid only if remote loopback with pattern was 
                performed and a sync was achieved on the test pattern."
        ::= { ciscoICsuDsuTestReportEntry 6 }

ciscoICsuDsuLoopbackDuration OBJECT-TYPE
        SYNTAX     TimeTicks
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "Duration of last successful loopback test in hundredths of 
                seconds.  Note that it is possible for the CSU/DSU to lose 
                framing during the test.  If so, the duration represents the 
                time between reframing and end of test.  This simply means 
                that the start time of last loopback cannot be calculated by 
                subtracting this duration from the end time of last loopback."
        ::= { ciscoICsuDsuTestReportEntry 7 }

ciscoICsuDsuLoopbackPoint OBJECT-TYPE
        SYNTAX INTEGER {
                dtePayload                (1),
                dteFull                   (2),
                lineFull                  (3),
                linePayload               (4),
                remoteSmartJack           (5),
                remoteFull                (6),
                remotePayload             (7)
        }
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "Point in network where last loopback was performed.

                 Meaning for t1 CSU/DSU:
                 dtePayload - local DSU loopback.  The configured 'fractions'
                        of the DS1 signal is looped back as the receive signal.
                        Used to verify operation of DSU portion of local 
                        CSU/DSU.
                 dteFull - local CSU loopback.  DS1 transmit signal is looped
                        back as the receive signal.  Runs at full bandwidth
                        irrespective of fractions configured.  Used to verify 
                        operation of local CSU/DSU.
                 lineFull - DS1 signal received from the network is transmitted
                        back to the network.  Signal is regenerated but not 
                        reframed.  Loopback performed at the CSU.  Used to 
                        verify operation of T1 network.
                 linePayload - DS1 signal received from the network is
                        transmitted back to the network.  Data is regenerated
                        and reframed with any LCV or CRC errors corrected.
                        Loopback performed at the DSU.  Used to verify 
                        operation of local CSU/DSU and T1 network. 
                 remoteSmartJack - the remote smart jack (telco installed wall
                        socket device used to delineate network between CPE and
                        telco equipment) is used to loopback the DS1 signal.  
                        Similar to remoteFull loopback except that the signal 
                        is looped at the smart jack before reaching remote 
                        CSU/DSU.   Used to verify operation of local CSU/DSU 
                        and T1 network.  
                 remoteFull - remote unit placed in lineFull loopback.  
                        Used to verify operation of local CSU/DSU and T1 
                        network. 
                 remotePayload - remote unit placed in linePayload loopback
                        Used to verify operation of local CSU/DSU, T1 network, 
                        and remote CSU/DSU.

                 Meaning for switched 56k CSU/DSU:
                 dteFull - local CSU loopback.  Transmit signal is looped back
                        as the receive signal at a point close to the physical
                        network interface.  Used to verify operation of local
                        CSU/DSU.
                 lineFull - CSU/DSU is split into separate DTE and loop 
                        interface sections.  Signal received from the network 
                        is transmitted back to the network.  Data received 
                        from DTE is transmitted back to DTE.  Used to verify 
                        operation of local CSU/DSU and network from remote site.
                 linePayload - Signal received from the network is looped
                        back at the DTE interface and transmitted back to the 
                        network.  Data received from DTE is ignored.  Used to
                        verify operation of local CSU/DSU and network from 
                        remote site.  
                 remotePayload - Similar to linePayload except that the
                        remote unit is placed into loopback.  Used to verify
                        operation of local CSU/DSU, T1 network, and remote
                        CSU/DSU. 
                 "
        ::= { ciscoICsuDsuTestReportEntry 8 }

ciscoICsuDsuLoopbackPattern OBJECT-TYPE
        SYNTAX INTEGER {
                noPattern            (1),
                patternQRW           (2),
                pattern0In1          (3),
                pattern1In1          (4),
                pattern1In2          (5),
                pattern1In3          (6),
                pattern1In5          (7),
                pattern1In8          (8),
                pattern3In24         (9),
                patternUser          (10),
                pattern2047          (11),
                pattern511           (12),
                patternStressDDS1    (13),
                patternStressDDS2    (14),
                patternStressDDS3    (15),
                patternStressDDS4    (16)
        }
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "Test pattern used for locally initiated remote loopback.
                 Valid only if a remote loopback was last performed.

                 Following patterns valid for T1 or Switched 56k CSU/DSU:
                 noPattern - no specific pattern is used, data provided by
                         the DTE.  Used to loopback transmit data.

                 Following patterns only valid for T1 CSU/DSU:
                 patternQRW - Quasi-Random Word pattern.  Specifically used to
                         measure Bit Error Rates.
                 pattern0In1 - repeated binary pattern of '0' or all zeros.
                         Typically used for verification of B8ZS optioning
                         of the T1 facility.
                 pattern1In1 - repeated binary pattern of '1' or all ones.
                         Typically used for signal power measurements.
                 pattern1In2 - repeated binary pattern of '01'.  Typically
                         used in testing for bridge taps.
                 pattern1In3 - repeated binary pattern of '001'.  Typically
                         used to terminate a remote loopback.
                 pattern1In5 - repeated binary pattern of '00001'.  Typically
                         used to put the remote unit in loopback.
                 pattern1In8 - repeated binary pattern of '00000001'.
                         Typically used to stress the timing recovery circuits
                         of repeaters and other intermediate equipment.
                 pattern3In24 - repeated binary pattern of
                         '000000000000000000000111' or hex '000007'.
                         Typically used to test for one's density
                         (consecutive zeros) tolerance on AMI lines.
                 patternUser - user defined pattern.

                 Following patterns only valid for Switched 56k CSU/DSU:
                 pattern2047 - 2047 bit long pseudorandom pattern containing a 
                        maximum of 10 sequential zeros and 11 sequential ones.
                 pattern511 - 511 bit long pseudorandom pattern containing a 
                        maximum of 8 sequential zeros and 9 sequential ones.
                 patternStressDDS1 - DDS Stress test pattern #1.
                 patternStressDDS2 - DDS Stress test pattern #2.
                 patternStressDDS3 - DDS Stress test pattern #3.
                 patternStressDDS4 - DDS Stress test pattern #4."
        ::= { ciscoICsuDsuTestReportEntry 9 }

ciscoICsuDsuUserDefinedPattern OBJECT-TYPE
        SYNTAX     DisplayString (SIZE (1..24))
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "User Defined Loopback Pattern.  Valid only if 
                ciscoICsuDsuLoopbackPattern is patternUser."
        ::= { ciscoICsuDsuTestReportEntry 10 }

ciscoICsuDsuLoopbackCode OBJECT-TYPE
        SYNTAX INTEGER {
                standard     (1),
                alternate    (2),
                v54          (3)
        }
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "LoopCode used to initiate last remote loopback.  Valid only 
                if a only if a remote loopback was last performed.
                standard - standard loopback code.  Usually consists of the 
                       repeated binary pattern of '00001'
                alternate - alternate loopback code.  Usually the inverse of 
                       the standard pattern or '11110'.
                v54 - V.54 pattern.  Used for fractional loopback."
        ::= { ciscoICsuDsuTestReportEntry 11 }

ciscoICsuDsuEndTimeOfLastLoopback OBJECT-TYPE
        SYNTAX     TimeStamp
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "SysUpTime of completion of last loopback test execution."
        ::= { ciscoICsuDsuTestReportEntry 12 }

--****************************************************************************
-- The T1 CSU/DSU Module Configuration Group
--****************************************************************************

ciscoICsuDsuT1ConfigTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CiscoICsuDsuT1ConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
                "The T1 CSU/DSU Unit Configuration Table.  Contains current
                T1 CSU/DSU configuration parameters not covered by RFC1406."
        ::= { ciscoICsuDsuT1 1 }

ciscoICsuDsuT1ConfigEntry OBJECT-TYPE
        SYNTAX      CiscoICsuDsuT1ConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
                "An entry in the configuration table for each integrated 
                T1 CSU/DSU."
        AUGMENTS { dsx1ConfigEntry }
        ::= { ciscoICsuDsuT1ConfigTable 1 }

CiscoICsuDsuT1ConfigEntry ::=
        SEQUENCE {
                ciscoICsuDsuT1LineBuildOut                     INTEGER,
                ciscoICsuDsuT1DteLineCode                      INTEGER,
                ciscoICsuDsuT1SupportRemoteAlarmIndication     TruthValue,
                ciscoICsuDsuT1FullBandwidthRemoteLoopcode      INTEGER,
                ciscoICsuDsuT1PayloadRemoteLoopcode            INTEGER
        }

ciscoICsuDsuT1LineBuildOut OBJECT-TYPE
        SYNTAX INTEGER {
                buildOut0    (1),
                buildOut7p5  (2),
                buildOut15   (3)
        }
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "Line build out (LBO) is loss inserted by the CSU
                 in order to meet the 15 to 22.5 dB loss requirement
                 of the premises remote-end section.   Selected so
                 that (phone company loss) + (cable length loss) +
                 (line build out) is greater that 15dB but less than
                 22.5 dB.
                 buildOut0 means insert 0 dB.
                 buildOut7p5 means insert 7.5 dB.
                 buildOut15 means insert 15 dB."
        ::= { ciscoICsuDsuT1ConfigEntry 1 }

ciscoICsuDsuT1DteLineCode OBJECT-TYPE
        SYNTAX INTEGER {
                normal   (1),
                inverted (2)
        }
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "Indicates whether the DTE line code is inverted or not.
                When fractional timeslots are configured for 64kps and AMI 
                linecode, a combination of inverting the DTE line code along 
                with the proper line protocol (i.e. HDLC/SDLC) may be necessary
                to meet the ones density constraint."
        ::= { ciscoICsuDsuT1ConfigEntry 2 }

ciscoICsuDsuT1SupportRemoteAlarmIndication OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "Determines if unit will generate or detect a remote alarm
                indication (RAI) signal which is also known as a yellow alarm.
                In D4 framing format, DTE equipment (including Frame Relay 
                equipment) that is using the HDLC or SDLC protocol may 
                generate patterns as part of its normal traffic.   These 
                patterns may be interpreted as yellow alarms and disrupt data
                traffic."    
        ::= { ciscoICsuDsuT1ConfigEntry 3 }

ciscoICsuDsuT1FullBandwidthRemoteLoopcode OBJECT-TYPE
        SYNTAX INTEGER {
                standard     (1),
                alternate    (2),
                disabled     (3)
        }
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "LoopCode to be accepted from remote end to place unit in 
                and out of full bandwidth loopback. 
                standard - standard loopback code.  Usually consists of the 
                       repeated binary pattern of '00001'
                alternate - alternate loopback code.  Usually the inverse of 
                       the standard pattern or '11110'.
                disabled - No code is accepted, disabling an request for 
                       remote loopback."
        ::= { ciscoICsuDsuT1ConfigEntry 4 }

ciscoICsuDsuT1PayloadRemoteLoopcode OBJECT-TYPE
        SYNTAX INTEGER {
                standard     (1),
                alternate    (2),
                disabled     (3),
                v54          (4)
        }
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "LoopCode to be accepted from remote end to place unit in 
                and out of payload or fractional loopback. 
                standard - standard loopback code.  Usually consists of the 
                       repeated binary pattern of '00001'
                alternate - alternate loopback code.  Usually the inverse of 
                       the standard pattern or '11110'.
                disabled - No code is accepted, disabling an request for 
                       remote loopback.
                v54 - V.54 pattern.  Used for fractional loopback."
        ::= { ciscoICsuDsuT1ConfigEntry 5 }

--****************************************************************************
-- The T1 CSU/DSU Status Group
--****************************************************************************

ciscoICsuDsuT1StatusTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CiscoICsuDsuT1StatusEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
                "The T1 CSU/DSU Unit Status Table.  Contains information about
                the status of the CSU/DSU, including externally generated
                alarm conditions."
        ::= { ciscoICsuDsuT1 2 }

ciscoICsuDsuT1StatusEntry OBJECT-TYPE
        SYNTAX      CiscoICsuDsuT1StatusEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
                "An entry in the status table for each integrated T1 CSU/DSU."
        INDEX   { ifIndex }
        ::= { ciscoICsuDsuT1StatusTable 1 }

CiscoICsuDsuT1StatusEntry ::=
        SEQUENCE {
                ciscoICsuDsuT1LoopStatus              Integer32,
                ciscoICsuDsuT1LossOfSignals           Counter32,
                ciscoICsuDsuT1LossOfFrames            Counter32,
                ciscoICsuDsuT1RemoteAlarmIndications  Counter32,
                ciscoICsuDsuT1AlarmIndicationSignals  Counter32
        }

ciscoICsuDsuT1LoopStatus OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "Current Loop status of T1 CSU/DSU.  Represented as a sum of
                a bit map.  The variable bit positions are:
                1 - lossofSignal (LOS); unable to detect the DS1 signal.
                2 - lossofFrame (LOF); unable to synchronize on the DS1
                        signal.
                4 - detectedRemoteAlarmIndication (RAI); indicates that the
                        transmitting equipment has lost its incoming signal.
                        RAI is commonly called yellow alarm.
                8 - detectedAlarmIndicationSignal (AIS); indicates that there
                        is a transmission interruption located either at the
                        equipment originating the AIS signal or upstream of
                        that equipment.  Indicated by an unframed, all-'ones'
                        signal.  Also known as blue alarm.
                16 - placedInLoopback;  Line placed in loopback from remote."
        ::= { ciscoICsuDsuT1StatusEntry 1 }

ciscoICsuDsuT1LossOfSignals OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "Number of times lossofSignal event detected."
        ::= { ciscoICsuDsuT1StatusEntry 2 }

ciscoICsuDsuT1LossOfFrames OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "Number of times lossofFrame event detected."
        ::= { ciscoICsuDsuT1StatusEntry 3 }

ciscoICsuDsuT1RemoteAlarmIndications OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "Number of times RemoteAlarmIndication signal or yellow alarm
                received."
        ::= { ciscoICsuDsuT1StatusEntry 4 }

ciscoICsuDsuT1AlarmIndicationSignals OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "Number of times Alarm Indication Signal or blue alarm
                received."
        ::= { ciscoICsuDsuT1StatusEntry 5 }


--****************************************************************************
-- The Sw56k CSU/DSU Module Configuration Group
--****************************************************************************

ciscoICsuDsuSw56kConfigTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CiscoICsuDsuSw56kConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
                "The Switched 56k CSU/DSU Configuration Table.  Contains
                current Sw56k CSU/DSU configuration parameters."
        ::= { ciscoICsuDsuSw56k 1 }

ciscoICsuDsuSw56kConfigEntry OBJECT-TYPE
        SYNTAX      CiscoICsuDsuSw56kConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
                "An entry in the sw56k configuration table for each integrated
                switched 56 kbps CSU/DSU."
        INDEX   { ifIndex }
        ::= { ciscoICsuDsuSw56kConfigTable 1 }

CiscoICsuDsuSw56kConfigEntry ::=
        SEQUENCE {
                ciscoICsuDsuSw56kNetworkType                INTEGER,
                ciscoICsuDsuSw56kClockSource                INTEGER,
                ciscoICsuDsuSw56kLoopRate                   INTEGER,
                ciscoICsuDsuSw56kScramblerEnabled           TruthValue,
                ciscoICsuDsuSw56kRemoteLoopbackEnabled      TruthValue
        }

ciscoICsuDsuSw56kNetworkType OBJECT-TYPE
        SYNTAX INTEGER {
                dds          (1),
                att          (2),
                sprint       (3),
                otherCarrier (4)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "Configures the DSU Module for the specific type of network
                being used.
                dds - AT&T's Dataphone Digital Service, generically known
                        as Digital Data System.  Requires 4-Wire interface.
                att - AT&T's Switched 56 Network.  Operates over 2-Wire or
                        or 4-Wire interface.
                sprint - Sprint Switched 56 Network.  Operates over 2-Wire or
                        4-Wire interface.
                otherCarrier - Other carrier being used."
        ::= { ciscoICsuDsuSw56kConfigEntry 1 }

ciscoICsuDsuSw56kClockSource OBJECT-TYPE
        SYNTAX INTEGER {
                internal (1),
                line     (2)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "Specifies the timing source for the DSU.  'internal' 
                indicates timing provided by DSU.  'line' indicates timing 
                provided by network receive signal."
        ::= { ciscoICsuDsuSw56kConfigEntry 2 }

ciscoICsuDsuSw56kLoopRate OBJECT-TYPE
        SYNTAX INTEGER {
                bps2400  (1),
                bps4800  (2),
                bps9600  (3),
                bps19k   (4),
                bps38k   (5),
                bps56k   (6),
                bps64k   (7)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "The Loop Rate option selects the network loop operating
                speed.  Only 'ciscoICsuDsuSw56kNetworkType' of 'dds' supports 
                all listed loop rates.  'att' and 'sprint' network types only
                support 'bps56k' or 56 kilobits per second."
        ::= { ciscoICsuDsuSw56kConfigEntry 3 }

ciscoICsuDsuSw56kScramblerEnabled OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "Indicates if line code scrambling is enabled.  Scrambling is
                used to prevent DTE data sequences that minic network loop
                maintenance functions from activating loopback.
                Only supported when operating in DDS mode at 64kbps (also
                known as clear channel mode)."
        ::= { ciscoICsuDsuSw56kConfigEntry 4 }

ciscoICsuDsuSw56kRemoteLoopbackEnabled OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "Indicates if a request for Remote Digital Loopback is
                will be accepted."
        ::= { ciscoICsuDsuSw56kConfigEntry 5 }


--****************************************************************************
-- The Sw56k CSU/DSU Module Status Group
--****************************************************************************

ciscoICsuDsuSw56kLineStatusTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CiscoICsuDsuSw56kLineStatusEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
                "The Sw56k CSU/DSU Status Table.  Contains information about
                the status of the CSU/DSU, including externally generated
                alarm conditions."
        ::= { ciscoICsuDsuSw56k 2 }

ciscoICsuDsuSw56kLineStatusEntry OBJECT-TYPE
        SYNTAX      CiscoICsuDsuSw56kLineStatusEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
                "An entry in the sw56k status table for each integrated 
                switched 56 kbps CSU/DSU."
        INDEX   { ifIndex }
        ::= { ciscoICsuDsuSw56kLineStatusTable 1 }

CiscoICsuDsuSw56kLineStatusEntry ::=
        SEQUENCE {
                ciscoICsuDsuSw56kDialingStatus        INTEGER,
                ciscoICsuDsuSw56kLoopStatus           Integer32,
                ciscoICsuDsuSw56kReceivedOosOofs      Counter32,
                ciscoICsuDsuSw56kLostSealingCurrents  Counter32,
                ciscoICsuDsuSw56kLostReceiveSignals   Counter32,
                ciscoICsuDsuSw56kLostFrameSyncs       Counter32,
                ciscoICsuDsuSw56kLoopRateSearches     Counter32
        }

ciscoICsuDsuSw56kDialingStatus OBJECT-TYPE
        SYNTAX INTEGER {
                idle             (1),
                dialing          (2),
                online           (3),
                noWinkFromSwitch (4),
                numberBusy       (5),
                noAnswer         (6)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "This variable indicates the dialing status of units using 
                switched connections.
                idle - on-hook and no call in progress.
                dialing - dialing a number.
                onLine - Online passing data.
                noWinkFromSwitch - No wink from switch (cleared after 5 
                     seconds).  Wink is a DC signalling method in which the 
                     polarity of the line is temporarily reversed and then 
                     returned to its original polarity as an acknowledgement. 
                numberBusy - Number is busy (cleared after 5 seconds).
                noAnswer - No answer. (cleared after 5 seconds)."
        ::= { ciscoICsuDsuSw56kLineStatusEntry 1 }

ciscoICsuDsuSw56kLoopStatus OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "Current loop status or alarm condition.  Represented as a sum 
                of a bit map.  The variable bit positions are:

                1   oosOofFromNetwork - The DSU is receiving Out of Service/
                        Out of Frame code from network indicating network
                        trouble.  This can be a problem with a device at the
                        remote DSU.  The most common cause of the this error
                        is either the remote DSU is powered off or the remote
                        telco connection is open.
                2   noReceiveSignal - The DSU has detected sealing current from
                        the central office but the receive level is below
                        -45db.
                4   noSealingCurrent - the DSU does not detect sealing current
                        on the loop interface.  This is normal for a private
                        network.
                8   noFrameSync - At 64k data rate the local loop operates at
                        72k with a framing pattern added to maintain byte
                        alignment with the network.  This condition is reported
                        if the DSU cannot find the framing pattern.
                16  attemptingToRateAdap - Set in 'autorate' mode when the DSU
                        is searching for the loop rate.
                32  rtTestFromTelco - Set when the DSU in telco initiated RT
                        test.
                64  llTestFromTelco - Set when the DSU in telco initiated LL
                        test or when the transmit and receive pairs are
                        reversed.
                128 rdlFromRemoteDSU - Set when remote digital loopback
                        initiated from remote DSU."
        ::= { ciscoICsuDsuSw56kLineStatusEntry 2 }

ciscoICsuDsuSw56kReceivedOosOofs OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "Number of times OOS/OOF (Out Of Sync / Out Of Frame) code
                received."
        ::= { ciscoICsuDsuSw56kLineStatusEntry 3 }

ciscoICsuDsuSw56kLostSealingCurrents OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "Number of times Lost Sealing Current."
        ::= { ciscoICsuDsuSw56kLineStatusEntry 4 }

ciscoICsuDsuSw56kLostReceiveSignals OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "Number of times lost receive signal."
        ::= { ciscoICsuDsuSw56kLineStatusEntry 5 }

ciscoICsuDsuSw56kLostFrameSyncs OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "Number of times lost frame synchronization."
        ::= { ciscoICsuDsuSw56kLineStatusEntry 6 }

ciscoICsuDsuSw56kLoopRateSearches OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "Number of times attempted Loop Rate Search."
        ::= { ciscoICsuDsuSw56kLineStatusEntry 7 }


--****************************************************************************
-- Notification Enables
--****************************************************************************

ciscoICsuDsuMIBNotificationEnables  OBJECT IDENTIFIER ::= { ciscoICsuDsuMIB 2 }

ciscoICsuDsuEnableT1LoopStatusNotification OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
                "Indicates whether or not a T1 Alarm Notification will be
                generated by this system."
        DEFVAL { false }
        ::= { ciscoICsuDsuMIBNotificationEnables 1 }

ciscoICsuDsuEnableSw56kLoopStatusNotification OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
                "Indicates whether or not a Sw56k Alarm Notification will be
                generated by this system."
        DEFVAL { false }
        ::= { ciscoICsuDsuMIBNotificationEnables 2 }



--****************************************************************************
-- Notifications
--****************************************************************************

ciscoICsuDsuMIBNotificationPrefix
        OBJECT IDENTIFIER ::= { ciscoICsuDsuMIB 3 }
ciscoICsuDsuMIBNotifications
        OBJECT IDENTIFIER ::= { ciscoICsuDsuMIBNotificationPrefix 0 }


ciscoICsuDsuT1LoopStatusNotification NOTIFICATION-TYPE
        OBJECTS { ciscoICsuDsuT1LoopStatus }
        STATUS current
        DESCRIPTION
                "Indicates a change in T1 Loop Status."
        ::= { ciscoICsuDsuMIBNotifications 1 }

ciscoICsuDsuSw56kLoopStatusNotification NOTIFICATION-TYPE
        OBJECTS { ciscoICsuDsuSw56kLoopStatus }
        STATUS current
        DESCRIPTION
                "Indicates a change in Sw56k Loop Status."
        ::= { ciscoICsuDsuMIBNotifications 2 }

--****************************************************************************
-- Conformance and compliance statements
--****************************************************************************

ciscoICsuDsuMIBConformance
        OBJECT IDENTIFIER ::= { ciscoICsuDsuMIB 4 }
ciscoICsuDsuMIBCompliances
        OBJECT IDENTIFIER ::= { ciscoICsuDsuMIBConformance 1 }
ciscoICsuDsuMIBGroups
        OBJECT IDENTIFIER ::= { ciscoICsuDsuMIBConformance 2 }


ciscoICsuDsuMIBCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
                "The compliance statement for entities which implement
                the Cisco Integrated CSU/DSU MIB"
        MODULE  -- compliance to this module
                MANDATORY-GROUPS {
                        ciscoICsuDsuMIBGroup
                }

                GROUP ciscoICsuDsuMIBT1Group
                DESCRIPTION
                        "The T1 group is mandatory for devices that have a t1 
                        interface."

                GROUP ciscoICsuDsuMIBSw56kGroup
                DESCRIPTION
                        "The Sw56k group is mandatory for devices that have a 
                        Sw56k interface."
        ::= { ciscoICsuDsuMIBCompliances 1 }


ciscoICsuDsuMIBGroup OBJECT-GROUP
        OBJECTS {
                ciscoICsuDsuType,
                ciscoICsuDsuHwRevision,
                ciscoICsuDsuSwRevision,
                ciscoICsuDsuProtocolRevision,
                ciscoICsuDsuLastSelfTestResult,
                ciscoICsuDsuTimeOfLastSelfTest,
                ciscoICsuDsuNumResets,
                ciscoICsuDsuTimeOfLastReset,
                ciscoICsuDsuLoopbackStatus,
                ciscoICsuDsuLoopbackNumErrors,
                ciscoICsuDsuLoopbackDuration,
                ciscoICsuDsuLoopbackPoint,
                ciscoICsuDsuLoopbackPattern,
                ciscoICsuDsuUserDefinedPattern,
                ciscoICsuDsuLoopbackCode,
                ciscoICsuDsuEndTimeOfLastLoopback
        }
        STATUS  current
        DESCRIPTION
                "The collection of objects providing general information
                about the integrated CSU/DSU."
        ::= { ciscoICsuDsuMIBGroups 1 }

ciscoICsuDsuMIBT1Group OBJECT-GROUP
        OBJECTS {
                ciscoICsuDsuT1LineBuildOut,
                ciscoICsuDsuT1DteLineCode,
                ciscoICsuDsuT1SupportRemoteAlarmIndication,
                ciscoICsuDsuT1FullBandwidthRemoteLoopcode,
                ciscoICsuDsuT1PayloadRemoteLoopcode,
                ciscoICsuDsuT1LoopStatus,
                ciscoICsuDsuT1LossOfSignals,
                ciscoICsuDsuT1LossOfFrames,
                ciscoICsuDsuT1RemoteAlarmIndications,
                ciscoICsuDsuT1AlarmIndicationSignals,
                ciscoICsuDsuEnableT1LoopStatusNotification
        }
        STATUS  current
        DESCRIPTION
                "The collection of objects providing information specific to
                integrated T1 CSU/DSU."
        ::= { ciscoICsuDsuMIBGroups 2 }

ciscoICsuDsuMIBSw56kGroup OBJECT-GROUP
        OBJECTS {
                ciscoICsuDsuSw56kNetworkType,
                ciscoICsuDsuSw56kClockSource,
                ciscoICsuDsuSw56kLoopRate,
                ciscoICsuDsuSw56kScramblerEnabled,
                ciscoICsuDsuSw56kRemoteLoopbackEnabled,
                ciscoICsuDsuSw56kDialingStatus,
                ciscoICsuDsuSw56kLoopStatus,
                ciscoICsuDsuSw56kReceivedOosOofs,
                ciscoICsuDsuSw56kLostSealingCurrents,
                ciscoICsuDsuSw56kLostReceiveSignals,
                ciscoICsuDsuSw56kLostFrameSyncs,
                ciscoICsuDsuSw56kLoopRateSearches,
                ciscoICsuDsuEnableSw56kLoopStatusNotification
        }
        STATUS  current
        DESCRIPTION
                "The collection of objects providing information specific to
                integrated Switched 56k CSU/DSU."
        ::= { ciscoICsuDsuMIBGroups 3 }

END